Chapter 8. Telnet/Terminal Menus
Editing the Temp Map
To edit the Temp Map, follow these steps.
Step
1
2
3
4
5
Applying the Temp Map
Once the Temp map reflects the desired configuration, use
Selections 8
respectively.
Reviewing Maps
Selections 4
assigned to Map A, Map B, and the Temp Map, respectively.
8-4
To make additional changes to the Temp Map, use
7 to enter the Temp Map edit mode.
Explanation:
Upon entering this mode, the cursor location moves to DS0
number one in the DS0 field of the Temp Map. The cursor
may be moved from one DS0 to another using the
until it is located at the DS0 number whose assigned
Keys
port needs to be changed.
Press the
Enter Key
Use the
Arrow Keys
selections.
Press the
Esc Key t
and return to the DS0 field.
Press the
Enter Key
return to the DS0 field.
Explanation:
Once the cursor is again located in the Temp Map DS0 field,
pressing the
Esc Key
return to
Selection 1
or
to apply this configuration to Map A or B,
9
through
TSU 120 User Manual
Action
to move the cursor to the Port field
to scroll through the possible port
o restore the previous port assignment
to save the current selected port and
a second time, causes the cursor to
below the Temp Map display.
give a summary of the number of ports
6
Selection
Arrow
61202129L1-1