Map Configuration; Initializing The Temp Map - ADTRAN TSU 120 User Manual

You can use the A
sor from one selection to another. Use the
the action displayed in the LCD to the right of the cursor.

Map Configuration

Map configuration consists of the following steps:

Initializing the Temp Map

Upon entering the DS0 maps configuration menu, the Temp
map reflects its last configured state.
initialize the displayed Temp Map to
one of three configurations.
initialize the Temp Map from its
current configuration to one which
reflects the currently stored Map A or
B configurations, respectively.
initialize the Temp Map to an all
IDLE state.
61202129L1-1
RROW
Step
1 Initialize the Temp Map to one of three
configurations:
• Current Map A
• Current Map B
• All Idles
This step is optional.
2 Edit the Temp Map so that it reflects the desired
map configuration.
3 Replace the current DS0 Map A or Map B
configuration with the Temp Map configuration.
If you want to...
TSU 120 User Manual
Chapter 8. Telnet/Terminal Menus
or
K
Number Keys
EYS
Enter Key
Action
Use these selections...
to move the cur-
to perform
1 - 3
1 , 2
3
8-3