Table of Contents
Advertisement
If an out-of-range number is entered, the unit assumes the
upper limit number of
Set the Unit Identification
In the
value between
Press
availability for operation by remote control. The unit proceeds
to the
No Unit ID Desired
Press
The unit will not be able to be operated by remote control.
Software Revision (Software Rev)
This menu provides access to the display of the current soft-
ware revision level loaded into the base unit controller. This
information is required when requesting assistance from
ADTRAN Customer Service or when updates are needed.
Press
Port Utility (Option Ports)
This menu provides access to the display of the current soft-
ware information for each port installed in the unit. This infor-
mation is required when requesting assistance from ADTRAN
customer service or when updates are needed.
ENET Address (TSU 120e only)
Displays the Ethernet address for the 10BaseT port.
Serial Number
Displays the serial number of the unit.
CMD Mode
Reserved for factory use.
61202129L1-1
999
(item 4) under the
U
ID M
NIT
ENU
and
2
999
to record the Unit ID number and to establish its
Enter
S
C
P
ET
ONTROL
ORT
at the
Enter
U
ID
NIT
to exit.
Cancel
TSU 120 User Manual
.
U
TIL
. The number
is reserved for the PC.
1
prompt.
without entering any numbers.
PROMPT
Chapter 6. Utility Menu
, enter any
M
ENU
6-5
Advertisement
Table of Contents
