Table of Contents
Advertisement
Manufacturer:
Thermo Fisher Scientific
Address:
25 Nimble Hill Road
Newington, NH 03801 USA
We declare that the following products conform to the Directives and Standards listed below.
Products: ThermoTemp Refrigerated and non refrigerated heated liquid baths
All rated 100Vac-50HZ & 60Hz or 115Vac-60Hz or 230Vac-50Hz.
Refrigerated and non refrigerated heated liquid baths:
Models: SC100, SC150, SC150L, AC150 or AC200 control head assembled with an A5B, A10B, A25B, A10, A25,
A28, A28F, A40, G50, S3, S7, S13, S15, S21, S30, S45, S49, S5P, S14P S21P, S6T, S12T or S19T.
Control heads, intended as a component for use only in the ThermoTemp product line of refrigerated and non refrigerated
liquid baths.
Models: SC100, SC150, SC150L, AC150, AC200, PC200 & PC300.
Bath assemblies intended as a component for use only with ThermoTemp control heads.
Models: A5B, A25, A10B, A24B, A25, A25B, A28 & A40.
Immersion circulators:
Models: SC100, SC150, SC150L, AC150, AC200, PC200, PC201 & PC300.
ThermoTemp bath accessories, not mains connected:
BOM #s: 1600027, 1600075 & 1600076.
Equipment Class: Measurement, control and laboratory
Directives and Standards:
2004/108/EC – Electromagnetic Compatibility ( EMCD ):
EN 61326-1: 2006 – Electrical equipment for measurement, control, and laboratory
use – EMC Requirements - EMC Class A.
2006/95/EC – Low Voltage Directive ( LVD ):
EN 61010-1: 2010 – Safety requirements for electrical equipment for measurement, control, and laboratory use:
general requirements.
En 61010-1: 2001 – Safety requirements for electrical equipment for measurement,
control, and laboratory use: General requirements.
En 61010-2-010: 2003 – Safety requirements for electrical equipment for measurement, control, and laboratory
use – part 2-010: Particular requirements for laboratory equipment for the heating of materials.
2011/65/EU - Restriction of the Use of Certain Hazardous Substances In Electrical and Electronic Equipment
( ROHSD ).
EN 50581: 2012 - Technical documentation for the assessment of electrical and electronic products with respect to
the restriction of hazardous substances.
2012/19/EU - Waste from Electrical and Electronic Equipment ( WEEED ).
Manufacturer's Authorized Representative:
__________________________
Robin Wiley Compliance Engineering
D of C
095285.1
DWG #
095285
DECLARATION OF CONFORMITY
Laboratory Equipment Div.
25 Nimble Hill Road
Newington, NH 03801
Date of inception 2009
Date:
14 July 2014
Form 094233
REV 17 Apr 07
Hide quick links:
Advertisement
Table of Contents
