Pulse Trigger; Slope Trigger - Tenma 72-7615 Manual

Trigger sensitivity
Trigger level scope
Trigger level accuracy
(Typical) applied on signals
of ≥20ns rise or fall time
Trigger capability
Load-off scope
Set level to 50% (Typical)
Edge type
Trigger mode
Pulse width
Trigger sensitivity
(Video trigger, Typical)
Signal format and line/field
frequency (video trigger type)
Trigger mode
Time Setting
Trigger accuracy
Resolution
Accuracy
Frequency scope
Trigger type
Trigger
Internal
EXT
EXT/5
Internal
EXT
EXT/5
Internal
EXT
EXT/5
Normal mode/scanning mode, pre-trigger/delayed trigger
Pre-trigger depth is adjustable
Input signal frequency ≥50Hz
Edge Trigger
Rise, Fall, Rise & Fall

Pulse Trigger

(Less than, greater than or equal) positive pulse;
(Less than, greater than or equal) negative pulse
Video Trigger
Internal
EXT
EXT/5
Supports standard NTSC and PAL
Line range: 1-525 (NTSC) and 1-625 (PAL)

Slope Trigger

>, < , = positive slope, >, < = negative slope
20ns-10s, pulse, video
Trigger Frequency
When AC coupling from 10Hz to full bandwidth
Pulse, edge or width
30
≤1 div
≥60mV
≤300mV
±8 div from the centre of the screen
±800mV
±4.0V
± (0.3 div x V/div) within ± 4 div from the
centre of the screen)
± (6% default value + 40mV)
± (6% default value + 200mV)
100ns ~ 1.5s
20ns ~ 10ns
≤3%
6 bit
±51ppm
2 div
400mV
2.0V