Table of Contents
Advertisement
Note:
Please use deep memory if you want to view more waveform details.
Fast Acquisition is recommended in order to capture certain abnormal signal. Fast
Acquisition is valid only within 1 ms/div~1 O0ns/div for single channel and
1 ms/div~200ns/div for dual channels.
Setting up the Display System
•
The DISPLAY button on the
control panel is the function key
for the display system.
Functions Menu
Types
Format
Grid
Continuous
X-Y Mode
Under the mode, CH1 voltage will be shown on the horizontal (x) axis, and CH2 voltage
will be shown on the vertical (y) axis.
Note: under X-Y Mode, to shift the waveform display horizontally with CH1 POSITION
control and shift it vertically with CH2 POSITION control. It is possible to regulate size
and shape of X-Y display with the SCALE control with two channels and it will display
effective Lissajous waveform by changing the time base.
The following functions can be displayed:
1.
Automatic measuring function
2.
Cursor measuring function
3.
Reference or mathematical function
Note: Window extension and horizontal position control are not available in X-Y Mode.
Storage System: pressing the STORAGE button displays the setup menu from where
you can save or recall waveforms and setup documents stored in memory both internal
and in USB storage devices.
Operating procedure
•
Press STORAGE to go to the
type menu. There are three
types to select from:
1.
WAVEFORM to go to the
waveform save menu.
2.
SETUP to enter the setup save menu.
3.
BITMAP to enter the position save menu
Note: this feature can only be recalled after connecting USB ram.
Setup
YT
Operating mode of the oscilloscope X-Y is the display mode
XY
CH1 is X input CH2 is Y input.
Vector
Sampling points are linked for display
Dots
Sampling points are directly displayed
Full
Grid
Set grid display mode of waveform display area
Cross Hair
Frame
The waveform on the screen is refreshed at higher speed
Off
The original waveform on the screen remains on display.
New data will be added continuously until this function is
Infinite
disabled.
Notes
19
Advertisement
Table of Contents
