Tenma 72-7615 Manual page 24

Cursor Measurement
• The CURSOR button on the
control panel is the function key
for cursor measurement.
• Adjust the cursor position by
turning the multi-function control.
Functions Menu
Types
Modes
Vertical Unit
Functions Menu
Types
Modes
Horizontal Unit
Setting up Auxiliary Functions
• The UTILITY button on the
control panel is the function key
for alternative functions.
Functions Menu
System
Configuration
Recording
waveform
By detecting
Setup
Time Select the time measurement cursor
Independently shift any one of the two cursors.
Simultaneously shift the two cursors while maintaining the
Modes
r
t.
Second
Hz Select to return to the parameter measurement display
Ratio menu
Phase
Setup
Voltage Select the Voltage measurement cursor
Independently shift any one of the two cursors.
Independent
Simultaneously shift the two cursors while maintaining the
Tracking
r
V.
Base Measurement parameter is voltage
Ratio Measurement parameter is percentage
Setup
Self-tuning Implement self-tuning
System Display information such as machine mode, version and
information serial number
Delete Delete the stored reference waveform and setting
information
Time setting Enter into date and time setting menu
Factory Restore the factory reset
reset
Contrast Regulate contrast of the screen.
----- Enter setup for recording waveform
on / off Detect if the input signal is within the stipulated scope
Notes
Notes
Notes
24