Raisecom
ISCOM6860 (A) Hardware Description
4.5 Ground cable
Connecting the ground cable properly is an important guarantee for lightning
protection, anti-electric shock, and anti-interference. The ISCOM6860 must be
grounded with the ground cable correctly during installation, which helps to avoid
personal injury and equipment damage.
4.5.1 Introduction
The ground cable is used to ground the ISCOM6860.
4.5.2 Appearance
The ground cable is composed of the OT terminal and the conductive wire. The OT terminal
is usually a non-insulated terminal. The conductive wire is a yellow/green copper soft flame-
retardant one. Figure 4-9 shows the ground cable. Figure 4-10 shows the OT terminal.
Figure 4-9 Ground cable
1
3
Figure 4-10 OT terminal
1
Conductive wire
Insulating sheath
Inner diameter of
soldering lug
Raisecom Technology Co., Ltd.
2
Stripped end
OT terminal
2
Outer diameter of
soldering lug
4 Cables
3
Thickness of soldering
terminal
40