Leds; Technical Specifications; Table 3-8 Leds On Smca Card - Raisecom ISCOM6860 Manual

Raisecom
ISCOM6860 (A) Hardware Description

3.2.4 LEDs

There are 5 LEDs on the SMCA card. Table 3-8 lists descriptions of these LEDs.

Table 3-8 LEDs on SMCA card

SYS/ALM
ACT
100M
LNK/ACT

3.2.5 Technical specifications

Table 3-9 lists technical specifications of SMCA card.
LED Number
1
1
1
1
Raisecom Technology Co., Ltd.
Status
Green System working status LED

Fast blinking green (4 Hz): the system is being
initialized.
 Slow blinking green (1 Hz): the system is
working properly.
 Off/Green: the system is working improperly.
Red Alarm LED

Red: a fault is generated.
 Blinking red: the card is inserted improperly.

Off: no fault is generated.
Orange Standby LED
 Orange: the card is in standby status.

Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Green Primary and secondary signal LED

Green: the card is a primary card.
 Off: the card is a secondary card.
Green Interface working rate LED

Green: the electrical interface is working at 100
Mbit/s.

Off: the electrical interface is working at 10
Mbit/s.
Green Line interface working status LED

Green: the line interface is connected properly.
 Blinking green: the line interface is
sending/receiving data.

Off: the line interface is improperly connected or
is not connected.
Description
3 Cards
12