Raisecom
ISCOM6860 (A) Hardware Description
Table 3-23 Interface of XEP8 card
1–8
3.6.4 LEDs
There are 9 LEDs on the XEP8 card. Table 3-24 lists descriptions of these LEDs.
Table 3-24 LEDs on XEP8 card
SYS/ALM
LNK1–LNK8
3.6.5 Technical specifications
Table 3-25 lists the technical specifications of XEP8 card.
Name
Type
XFP PON
LED
Number
1
8
Raisecom Technology Co., Ltd.
Usage
Service interface
Status
Green
System working status LED
Fast blinking green (4 Hz): the system is being
initialized.
Slow blinking green (1 Hz): the system is
working properly.
Off/Green: the system is working improperly.
Red
Alarm LED
Blinking red: the card is inserted improperly.
Red: a fault is generated.
Off: no fault is generated.
Orange Standby LED
Orange: the card is in standby status.
Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Green
PON interface working LED
Green: the interface is properly connected and
a regularly-registered ONU is working on the
interface.
Off: the interface is not connected or there is
no regularly-registered ONU working on the
interface.
Description
Available optical modules:
10G/1GBASE-PRX30
Description
3 Cards
20