Interfaces; Leds; Figure 3-3 Appearance Of Ep16 Card; Table 3-11 Interface Of Ep16 Card - Raisecom ISCOM6860 Manual

Raisecom
ISCOM6860 (A) Hardware Description

Figure 3-3 Appearance of EP16 card

3.3.3 Interfaces

There are 16 interfaces on the EP16 card. Table 3-11 describes these interfaces.

Table 3-11 Interface of EP16 card

1–16

3.3.4 LEDs

There are 17 LEDs on the EP16 card. Table 3-12 lists descriptions of these LEDs.

Table 3-12 LEDs on EP16 card

SYS/ALM
LNK1–LNK16
Name Type
SEP EPON
LED Number
1
16
Raisecom Technology Co., Ltd.
Purpose
Service downlink
interface
Status
Green System working status LED
 Fast blinking green (4 Hz): the system is being
initialized.
 Slow blinking green (1 Hz): the system is
working properly.
 Off/Green: the system is working improperly.
Red Alarm LED

Blinking red: the card is inserted improperly.
 Red: a fault is generated.
 Off: no fault is generated.
Orange Standby LED
 Orange: the card is in standby status.
 Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Green PON interface working LED

Green: the interface is properly connected and
a regularly-registered ONU is working on the
interface.

Off: the interface is not connected or there is
no regularly-registered ONU working on the
interface.
Description
Available optical modules:
1000BASE-PX20-D-M
Description
3 Cards
14