Interfaces; Leds; Figure 3-9 Appearance Of Xp4A Card; Table 3-35 Interface Descriptions Of Xp4A Card - Raisecom ISCOM6860 Manual

Raisecom
ISCOM6860 (A) Hardware Description

Figure 3-9 Appearance of XP4A card

3.9.3 Interfaces

There are 4 interfaces on the XP4A card. Table 3-25 describes the interface type and usage.

Table 3-35 Interface descriptions of XP4A card

1–4

3.9.4 LEDs

There are 5 LEDs on the XP4A card. Table 3-36 lists descriptions of these LEDs.

Table 3-36 LEDs on XP4A card

SYS/ALM
Name Type
SFP+
LED Number
1
Raisecom Technology Co., Ltd.
Usage
10GE Ethernet optical
interface
Status
Green System working status LED
 Fast blinking green (4 Hz): the system is being
initialized.
 Slow blinking green (1 Hz): the system is
working properly.
 Off/Green: the system is working improperly.
Red Alarm LED

Blinking red: the card is inserted improperly.
 Red: a fault is generated.
 Off: no fault is generated.
Orange Standby LED
 Orange: the card is in standby status.
 Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Description
Available optical modules:
 10GBASE-LR/LW
 10GBASE-SR/SW
Description
3 Cards
26