Interfaces; Leds; Figure 3-4 Appearance Of Gp8A Card; Table 3-15 Interface Of Gp8A Card - Raisecom ISCOM6860 Manual

Raisecom
ISCOM6860 (A) Hardware Description

Figure 3-4 Appearance of GP8A card

3.4.3 Interfaces

There are 8 interfaces on the GP8A card. Table 3-15 describes the interface type and usage.

Table 3-15 Interface of GP8A card

1–8

3.4.4 LEDs

There are 9 LEDs on the GP8A card. Table 3-16 lists descriptions of these LEDs.

Table 3-16 LEDs on GP8A card

SYS/ALM
LNK1–LNK8
Name Type
SFP GPON
LED Number
1
8
Raisecom Technology Co., Ltd.
Usage
Service interface
Status
Green System working status LED
 Fast blinking green (4 Hz): the system is being
initialized.
 Slow blinking green (1 Hz): the system is
working properly.

Off/Green: the system is working improperly.
Red Alarm LED
 Blinking red: the card is inserted improperly.

Red: a fault is generated.
 Off: no fault is generated.
Orange Standby LED

Orange: the card is in standby status.
 Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Green PON interface working LED
 Green: the interface is properly connected and
a regularly-registered ONU is working on the
interface.
 Off: the interface is not connected or there is
no regularly-registered ONU working on the
interface.
Description
Available optical modules:
Class B+ and Class C+
Description
3 Cards
16