Raisecom
ISCOM6860 (A) Hardware Description
3.7.2 Panel and slots
The GE16 card can be inserted into slots 3–9 of the ISCOM6860 chassis.
Figure 3-7 shows appearance of the GE16 card.
Figure 3-7 Appearance of GE16 card
3.7.3 Interfaces
There are 16 interfaces on the GE16 card. Table 3-27 describes the interface type and usage.
Table 3-27 Interface of XEP8 card
1–16
3.7.4 LEDs
There are 33 LEDs on the GE16 card. Table 3-28 lists descriptions of these LEDs.
Table 3-28 LEDs on GE16 card
SYS/ALM
Name
Type
SFP
LED
Number
1
Raisecom Technology Co., Ltd.
Usage
Ethernet optical
interface
Status
Green
System working status LED
Fast blinking green (4 Hz): the system is being
initialized.
Slow blinking green (1 Hz): the system is
working properly.
Off/Green: the system is working improperly.
Red
Alarm LED
Blinking red: the card is inserted improperly.
Red: a fault is generated.
Off: no fault is generated.
Orange Standby LED
Orange: the card is in standby status.
Off: the card is not in standby status.
When the card is in standby status, other
LEDs are off.
Description
Available optical modules:
1000BASE-X
Description
3 Cards
22