Table of Contents
Advertisement
www.raisecom.com
3.1 Device front panel description
24 100M Ethernet SFP interfaces, 2 1000M Ethernet SFP interfaces, 2 1000M Ethernet RJ-45
interfaces and dozens of status indicators are placed on the front panel of ISCOM2828F switch (see
the figure below).
In the figure shown above:
① The logo and model of the switch are RAISECOM and ISCOM2828F respectively.
② 3 device status indicators: SYS, PWR1 and PWR2.
Indicator
SYS
PWR1
PWR2
③ The CONSOLE interface.
④ Interface 27 and 28 are 10/100/1000M Ethernet electrical interfaces. There are 2 indicators for
Chapter 3 Device Appearance
6
Color
Green
Green
Green
each interface: LNK/ACT and 1000M.
Status
Description
Flickering
The system is operating in order.
Other
Software fault or the system is initializing
Status
after electrifying. (When the system is just
electrified, it will take about 1 minute to
initialize.
indicator SYS will not flicker.)
ON
The power supply module 1 is electrified.
OFF
The power supply module 1 is not electrified,
or fault occurs on the power supply.
ON
The power supply module 2 is electrified.
OFF
The power supply module 2 is not electrified,
or fault occurs on the power supply.
User Manual
5
During
the
initialization,
1
2
4
3
the
5
Advertisement
Table of Contents
