Setting The Fax Activity Report Interval; Using The Reports Key - Brother FAX-2800 Owner's Manual

Setting the Fax Activity Report Interval

You can set the machine to print activity reports at specific intervals (6, 12, 24
hours, 2, 4, or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the next page.
1
Press Menu/Set, 2, 4, 2.
2
Press to choose an interval,
or
and then press Menu/Set.
(If you choose 7 days, the LCD prompts you to choose a day at which to begin
the 7-day countdown.)
3
Enter the time to begin printing, in 24-hour format, and then press Menu/Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.

Using the Reports Key

Five reports are available:
10 - 2
P R I N T I N G R E P O R T S
Prints the Menu Table so you can see at-a-
glance how to quickly program every menu
selection.
Lists names and numbers stored in Speed Dial
and One Touch Dial (FAX-2800) memory, in
numerical order.
Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a Transmission Verification Report for
your last transmission.
Lists settings for GENERAL
SETUP RECEIVE,
SETUP REPORTS, and
The settings for REMOTE FAX OPT
included.
SETUP,
SETUP SEND,
TEL SERVICE.
are