Brother FAX-2800 Owner's Manual page 195

DIFFICULTY
I cannot print from my
application software.
Sometimes I get the
error message
MEMORY
printing certain
documents from
®
Windows .
The MFC does not load
paper. The LCD shows
CHECK PAPER
PAPER JAM.
How can I load
envelopes?
What paper can I use?
How can I clear paper
jams?
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
SUGGESTIONS
®
Windows Setup Printing Difficulties
Make sure the Windows
and that you selected it in your application
software.
If you are using the supplied Windows
OUT OF the error recover operation on in the Setup dialog
when box and try again. Reduce the print resolution or
reduce the complexity of your document and try
again.
Check to see if the
JAM
or purpose sheet feeder may be out of paper or not
properly installed. If it is empty, load a new stack
of paper into the feeder and then press Fax Start.
If there is paper in the multi-purpose sheet feeder,
make sure it is straight. If the paper is curled, you
should straighten it. Sometimes it is helpful to
remove the paper, turn the stack over and place it
back into the multi-purpose sheet feeder. Reduce
the amount of paper in the multi-purpose sheet
feeder, and then try again.
You can load envelopes from the multi-purpose
sheet feeder. Your application software must be set
up to print the envelope size you are using. This is
usually done in the Page Setup or Document Setup
menu of your software. Refer to your application
manual.
You can use plain paper, envelopes, organizer
paper, transparencies and labels for laser
machines. For information on paper you can use,
See
Acceptable Paper
See
Paper Jam
®
CHECK PAPER
message appears on the LCD. If so, the multi-
on page 2-7.
on page 20-5 to 20-6.
printer driver is installed
®
driver, turn
or PAPER
20 - 11