Setting Station Id; Entering Text - Brother FAX-2800 Owner's Manual

Setting Station ID

You can store your name, fax number, and telephone number to be printed on
all fax pages that you send. (See
1
Press Menu/Set, 1, 3.
2
Enter your fax number (up to 20 digits),
and then press Menu/Set.
You must enter a fax number to proceed.
3
Enter your telephone number (up to 20
digits) and press Menu/Set. If your
telephone number and fax number are the
same, enter the same number again.
The telephone number you enter is used only for Cover Page features.
(See
Composing Electronic Cover Page
4
Use the dial pad to enter your name (up to
20 characters), and then press
Menu/Set.
(See

Entering Text

5
Press Stop/Exit.
The LCD returns to the date and time.
If your Station ID has already been programmed, the LCD prompts "1" to make
a change, or "2" to exit without changing.
Entering Text
When you are setting certain menu selections, such as the Station ID, you may
need to type text into the FAX/MFC. Most dial pad keys have three or four
letters printed above them. The keys for 0, #, and
because they are used for special characters.
By pressing the appropriate dial pad key repeatedly, you can access the
character you want.
Press Key
2
3
4
5
6
7
8
9
Composing Electronic Cover Page
, below.)
one time two times
A
D
G
J
M
P
T
W
, page 6-6.)
don't have printed letters
three times
B C
E F
H I
K L
N O
Q R
U V
X Y
I N I T I A L S E T U P
, page 6-6.)
four times
2
3
4
5
6
S
8
Z
4 - 2