Setting The Handset Volume; Choosing The Handset Volume (For Volume Amplify) - Brother FAX-2800 Owner's Manual

Setting the Handset Volume

1
Press Menu/Set, 1, 4, 4.
2
Press to select
or
3
Press Stop/Exit.
—OR—
You can adjust the handset volume any time you are talking on the telephone.
There are two handset volume levels,
LOW.
Press or to adjust the volume level. The LCD shows the setting you are
choosing. The new setting will remain until you change it again.

Choosing the Handset Volume (For Volume Amplify)

Before you begin to use the machine, you must decide if you need to set the
handset volume to
The AMPLIFY volume level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired.
During a conversation, users can press Volume
adjust the volume to
volume will remain until you change it again.
VOLUME AMPLIFY: ON—TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press Volume
volume to LOW,
handset volume returns to the default setting of LOW.
VOLUME AMPLIFY:ON—PERMANENT
Choose VOL AMPLIFY:ON
hearing-impaired. During a conversation, users can press Volume
control panel to adjust the volume to
handset is replaced, the handset volume returns to the default setting of
When you press Volume
LCD shows the setting you are choosing. Each key press changes the volume
to the next setting.
4 - 5
I N I T I A L S E T U P
), and then press Menu/Set.
HIGH (or LOW
VOL AMPLIFY: ON
LOW or HIGH. When the handset is replaced, the handset
HIGH or AMPLIFY. When the handset is replaced, the
— PERMANENT
LOW
on the control panel to adjust the volume, the
or
LOW and HIGH. The default setting is
for a user who is hearing-impaired.
or on the control panel to
on the control panel to adjust the
or
if all of the users are
, HIGH or AMPLIFY
on the
or
. When the
AMPLIFY .