Access Codes And Credit Card Numbers - Brother FAX-2800 Owner's Manual

Access Codes and Credit Card Numbers

Sometimes you may want to choose from among several long distance carriers
when you make a call. Rates may vary depending upon the time and destination.
To take advantage of low rates, you can store the access codes or long-distance
carriers as One Touch (For FAX-2800) or Speed Dial numbers. You can store
these long dialing sequences by dividing them and setting them up on separate
keys in any combination. You can even include manual dialing using the dial
pad. The combined number will be dialed in the order you entered it, as soon as
you press Fax Start. (See ,
Storing One Touch Dial Numbers (For FAX-2800 Only)
page 7-1, and , page 7-2.)
Storing Speed Dial Numbers
For the FAX-2800, you can store "555" on One Touch key 3 and "7000" on One
Touch key 4. If you press One Touch 3, 4, and Fax Start, you can dial
"5557000". To temporarily change a number, you can substitute part of the
number with manual dialing using the dial pad. For example, to change the
number to 5557001 you could press One Touch 3 and then press 7, 0, 0, 1 using
the dialing pad.
For FAX-2800 and MFC-4800, you can store "555" on Speed Dial key # 03 and
"7000" on Speed Dial key # 04. If you press Search/Speed Dial, #, 0, 3 and
Search/Speed Dial, #, 0, 4, and Fax Start, you can dial "5557000". To
temporarily change a number, you can substitute part of the number with manual
dialing using the dial pad. For example, to change the number to 5557001 you
could press Search/Speed Dial, #, 0, 3 and then press 7, 0, 0, 1 using the
dialing pad.
If you must wait for another dial tone at any point in the dialing sequence, store
Note
a pause at that point in the number by pressing Redial/Pause. Each key press
adds a 3.5 second delay.
7 - 6
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S