Basic Sending Operations; Contrast; Fax Resolution - Brother FAX-2800 Owner's Manual

Basic Sending Operations

Contrast

If your document is very light or very dark, you might want to set the contrast.
Use S.LIGHT
document.
1
Place the original face down in the ADF.
2
Press Menu/Set, 2, 2, 1.
3
Press to select AUTO,
or
S.DARK, and then press Menu/Set.
4
Press 1 if you want to select additional settings. The LCD returns to the
SEND menu—OR—Press 2 if you are finished choosing settings, and then go
to Step 5.
5
Enter a fax number.
6
Press Fax Start.

Fax Resolution

When you have a document in the ADF, you can use the Fax Resolution key
to change the setting temporarily (for this fax only). Press Fax Resolution
repeatedly until the LCD shows the setting you want.
—OR—
You can change the default setting.
1
Press Menu/Set, 2, 2, 2.
2
Press to select the resolution you want,
or
and then press Menu/Set.
3
Press Stop/Exit.
STANDARD—Suitable for most typed documents.
FINE—Good for small print; transmits a little slower than Standard resolution.
S. FINE—Good for small print or artwork; transmits slower than Fine
resolution.
PHOTO—Use when original has varying shades of gray; slowest transmission
time.
6 - 5
S E T U P S E N D
to send a very light document. Use
S.LIGHT
S.DARK
or
to send a very dark
SETUP