Setting The Ring Volume; Setting The Beeper Volume; Setting The Speaker Volume - Brother FAX-2800 Owner's Manual

Brother fax-2800: owners manual
Hide thumbs Also See for FAX-2800:
Table of Contents

Advertisement

Setting the Ring Volume

1
Press Menu/Set, 1, 4, 1.
2
Press
to select OFF, LOW,
or
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your FAX/MFC is idle. You can turn the
ring
OFF
or you can select a ring volume level.
Press
to adjust the volume level. With each key press, the FAX/MFC rings
or
so you can hear the active setting as the LCD shows it.
Each key press changes the volume. The new setting will remain until you
change it again.

Setting the Beeper Volume

You can set the beeper to LOW,
When the beeper is set to
press a key or make an error and when fax sending or receiving has finished.
1
Press Menu/Set, 1, 4, 2.
2
Press
to select OFF,
or
3
Press Stop/Exit.

Setting the Speaker Volume

1
Press Menu/Set, 1, 4, 3.
2
Press
or
to select LOW, MED,
3
Press Stop/Exit.
—OR—
If you are using Hook, you can adjust the speaker volume while dialing. You
can turn the speaker off or you can select a speaker volume level. The default
setting is the lowest volume.
Press
to adjust the volume level. With each key press, the volume changes
or
as the LCD shows the active setting. The new setting will remain until you
change it again.
or HIGH, and then press Menu/Set.
MED
HIGH
or OFF. The default setting is LOW.
LOW
or HIGH, the FAX/MFC beeps every time you
LOW
or HIGH, and then press Menu/Set.
or OFF, and then press Menu/Set.
HIGH
I N I T I A L S E T U P
4 - 4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-4800Fax 2800 - b/w laser - fax

Table of Contents