Changing Default Copy Settings; Copy Mode (Type Of Original); Copy Contrast - Brother FAX-2800 Owner's Manual

Changing Default Copy Settings

Press Menu/Set, 3 to change default settings for Copy mode. These settings
will remain until you change them again by pressing Menu/Set. Adjust the
Contrast and Quality settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press or
to save your selection. Press Stop/Exit—OR—Press
setting you want to change.
Press Menu/Set, and 3.
1.COPY MODE
2.CONTRAST

Copy Mode (Type of Original)

You can select the Copy resolution for your type of original. The default setting
is AUTO, which is used for originals that contain both text and photographs.
TEXT is used for originals containing only text.
photographs.
1
Press Menu/Set, 3, 1.
2
Press to choose the type of original (AUTO,
or
press Menu/Set.
3
Press Stop/Exit.

Copy Contrast

You can adjust the copy contrast to make copies darker or lighter.
1
Press Menu/Set, 3, 2.
2
Press to make a copy lighter
—OR—Press
and then press Menu/Set.
3
Press Stop/Exit.
to scroll through the options for each setting. Press Menu/Set
AUTO
TEXT
PHOTO
to make a copy darker,
- +
PHOTO
TEXT or PHOTO), and then
M A K I N G C O P I E S
to select the next
is default
is used for copying
11 - 6