Ptz Menu Setup; System Information; System Setup - Speco O4P30X2 User Manual

4mp ptz network camera

Hide thumbs Also See for O4P30X2:

Table of Contents

4 PTZ Menu Setup

On the PTZ control panel of IE remote preview interface, call Preset 95 and click

setup.

 The menu setup can be displayed when the resolution of the live is set to 1920×1080.

After you go to the main menu interface, you can select the menu by clicking the direction button (

：To select menu by moving up and down.

：To return to the menu on the left.

：To confirm to enter sub-menu or to select the menu on the right.

Note: Dash (-) before the menu means that the menu is not available. Different models may have different menus. The menus in this

manual are for reference only.

Select System Setup by clicking

You can view the software and firmware version, camera, system temperature, date, dome ID, dome protocol and baud rate here.

Select System Setup by clicking

button and then click

. This will take you to see the following main menu

button to go to System Information menu as shown below:

button to enter System Setup as shown below:

Table of Contents