Osd Menu Details; Preset Mode; Menu Setup; Lens Setting - Speco HT7246H Instruction Manual

Preset Mode

●
1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR.
- Used for a quick and easy setup for the installation environment.

Menu Setup

●
1. Press the Function Setup switch.
- Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
- Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'RETURN' and press the Function Setup switch.
☞ NOTE
■ An item with the
with the icon and press the Function Setup switch.
■ An item with the - - - icon is unavailable due to function settings.

Lens Setting

●
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using the Up and Down buttons so
that the arrow indicates 'LENS'.
SPECO TECH
1.PRESET MODE
2.MAIN SETUP
3.EXIT
MAIN SETUP
1.LENS
2.EXPOSURE
3.WDR
4.WHITE BAL
5.BACKLIGHT
6.SPECO DNR
7.DAY/NIGHT
8.SPECIAL
9.RETURN
icon also has sub menus. To select a sub menu, select an item
19
INDOOR
RESET
DC
OFF
ATW
OFF
ON
AUTO
SAVE