Speco O4P30X2 User Manual page 30

2. Click "Enable" and set the alarm holding time.
3. Set alarm trigger options. Trigger alarm out, Email and FTP. The setup steps are the same as motion detection. Please refer to
motion detectionchapter for details.
⚫
IP Address Conflict
1. Go to Event Setup→Anomaly→IP Address Collision as shown below.
2. Click "Enable alarm" and set the alarm holding time.
3. Trigger alarm out. When the IP address of the camera is in conflict with the IP address of other devices, the system will trigger the
alarm out.
⚫
Cable Disconnection
1. Go to Event Setup→Anomaly→Cable Disconnected as shown below.
2. Click "Enable" and set the alarm holding time.
3. Trigger alarm out. When the camera is disconnected, the system will trigger the alarm out.
26