Table of Contents
Advertisement
Click "Modify" to change people information and click "Delete" to delete this face picture.
5.
Set face comparison trigger options. Click "Comparison and Linkage" to go to the following interface.
Deduplication Period: In the set period, delete the repeated comparison results.
Similarity threshold: When the similarity of the captured face picture and the face picture added into the face database exceeds the
similarity threshold, alarms will be triggered.
Alarm List: Select an alarm list. For example, if "Stranger" is selected, the system will automatically search the matched face picture
from "Stranger" list/group when detecting a face and both face pictures will appear on the left in the face comparison interface.
Alarm Trigger Mode: Face only mode. When the captured face picture is matched successfully, alarms will be triggered.
Alarm Output: if enabled, this will trigger alarm output when the captured face is matched successfully.
6.
Set the schedule of the face detection and comparison. The setup steps of the schedule are the same as schedule recording setup
(See
Schedule
Recording).
7.
Advanced configuration.
Application Scenes: "Access control", "security monitoring" or "customize" can be selected.
Snapshot Interval: If 5 seconds is selected, the camera will capture the same target once every 5 seconds during its continuous tracking
period.
Snapshot Number: If the snapshot number is enabled and set (eg. 3), the camera will capture the same target once every 5 seconds
and it will capture this target 3 times at most during its continuous tracking period. If the snapshot number is disabled, the camera
will capture the same target once every 5 seconds until the target disappears in the detected area.
⚫
Face Match View
After all face comparison settings are set successfully, enter the live view interface. Click
39
to view the captured face pictures and
Advertisement
Table of Contents
