Table of Contents
Advertisement
Use this to draw the approximate size of the face that you want the camera to capture. This is useful when there are multiple faces in
the background or foreground that are not needed to be captured. To enable, Click "Draw Area" and drag the border lines of the
rectangle to modify its size. Move the rectangle to change its position. Click "Stop Draw" to stop drawing the area. Click "Clear" to
clear the area. Then set the detectable face size by defining the maximum value and the minimum value (The default size range of a
single face image occupies from 3% to 50% of the entire image).
4. Face database management: click "Face Database Management" tab. This will enter the following interface.
There are four ways to add face pictures.
① Adding face pictures one by one
Click
to pop up an adding user box. Then click
to select a face picture saved on the local PC. Please select the picture
according to the specified format and size limit. After that, fill out the relevant information of the face picture and click "Entry" to add.
② Adding multiple face pictures at a time
Click
and then add multiple face pictures once according to the prompted rules.
③ Add face pictures by using face album management tool
④ Add the captured picture in the live mode (See Add captured face pictures to the face database).
After adding face pictures, you can search them by name, gender, ID number and so on.
38
Advertisement
Table of Contents
