Osd Menu Details; Preset Mode; Menu Setup; Lens Setting - Speco 650Line Intensifier3 HTINTB8G Instruction Manual

Preset Mode

●
1. Preset : INDOOR / OUTDOOR / LOW LIGHT / HALLWAY / LOBBY / ELEVATOR.
- Used for a quick and easy setup for the installation environment.

Menu Setup

●
1. Press the Function Setup switch.
- Main setup menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
- Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'RETURN' and press the Function Setup switch.
☞ NOTE
■ An item with the
with the icon and press the Function Setup switch.
■ An item with the - - - icon is unavailable due to function settings.

Lens Setting

●
Using this function, you can control the screen brightness.
1. When the SETUP menu screen is displayed, select 'LENS' by using
the Function Setup switch so that the arrow indicates 'LENS'.
2. DC : You can adjust the minimum shutter and maximum value of ESC
shutter mode.
SPECO TECH
1.PRESET MODE
2.MAIN SETUP
3.EXIT
MAIN SETUP
1.LENS
2.EXPOSURE
3.WHITE BAL
4.WDR
5.BACKLIGHT
6.SPECO DNR
7.DAY/NIGHT
8.SPECIAL
9.RETURN
◀
icon also has sub menus. To select a sub menu, select an item
INDOOR
RESET
DC
ATW
OFF
OFF
ON
AUTO
SAVE
13