Setting Your Station Id; Setting Tone Or Pulse Dialling Mode - Brother MFC-5460CN Quick Setup Manual

9

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu.
2
Press 0.
3
Press 3.
4
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a "+" for
international codes, press l. For example, to
enter the UK dialling code "+44", press l, 4, 4
and then the rest of your number.
Station ID
Fax:+44XXXXXXXX
5
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Station ID
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or
under the incorrect character, press Clear/Back.
Press One Two
key time times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
6
Press Stop/Exit.
Note
If you want to repeat input, press Stop/Exit to start
from step 1.
For details, see Entering Text in Appendix C
of the User's Guide.
to move the
to move the cursor
Three Four
times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
Setting Up the Machine
10 Setting tone or pulse dialling
mode
1
Press Menu.
2
Press 0.
3
Press 4.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
7