Change Fax Forwarding Setting; Retrieve A Fax; Check The Receiving Status; Change Answer Mode - Brother MFC-760 Owner's Manual

78
C H A P T E R N I N E

Change Fax Forwarding Setting

Press 9 5
then to
Turn Fax Forwarding OFF––Press 1.
Turn Fax Forwarding ON––Press 2.
Program Fax Forward Number––Press 4. Automatically, the machine
Turn Fax Storage ON––Press 6.
Turn Fax Storage OFF––Press 7. (This is only possible if there are no
faxes stored in the memory, or if all faxes have been erased using
Remote Control 9 6 3).

Retrieve a Fax

Press 9 6
then to
Print a Memory Status List––Press 1, then enter the number of remote
fax machine and the # #, After the beep, hang up and wait.
Retrieve all faxes––Press 2, then enter the number of remote fax
machine and the # #, After the beep, hang up and wait.
Erase all fax messages––Press 3. If the data stored in the memory has
not been printed before, it will be printed first and then erased.

Check the Receiving Status

Press 9 7
then for
Fax messages––Press 1.
1 long beep––Received messages.
3 short beeps––No messages.

Change Answer Mode

Press 9 8
then for
EXT.TEL/TAD––Press 1.
Fax––Press 2.

Exit Remote Operation

Press 9 0
will turn Fax Forwarding ON.