Brother DCP-340CW Network User's Manual page 98
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Wireless installation for Windows
6
Choose Wireless Setup and Driver Install, and
then click Next.
7
Choose Automatic (Recommended) and then click
Next.
8
For configuration, it is recommended that you
temporarily connect your Brother wireless device
directly to a free port on your access point, hub or
router using a network cable.
If you can temporarily connect with a network cable:
Choose I'm able to temporarily connect my
device to my access point with a network cable
and then click Next.
Go to step 9.
If you do not have a network cable or cannot
temporarily connect the Brother wireless device to
your access point:
Choose I'm not able to connect my device to my
access point with a network cable and then click
Next.
Go to step 10.
®
8
8 - 16
Advertisement
Table of Contents
Troubleshooting
