Download  Print this page

Brother DCP-340CW Network User's Manual

Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server.
Hide thumbs

Advertisement

Multi-Protocol On-board Ethernet Multi-function Print Server
and Wireless (IEEE 802.11b/g) Ethernet Multi-function Print Server
NETWORK
USER'S GUIDE
DCP-340CW
MFC-640CW
MFC-820CW
Please read this manual thoroughly before using this machine
on your network. You can print or view this manual from the
CD-ROM at any time, please keep the CD-ROM in a conven-
ient place for quick and easy reference at all times.
The Brother Solutions Center
(http://solutions.brother.com) is your one stop resource for all
your printing needs. Download the latest drivers and utilities
for your machine, read FAQs and troubleshooting tips or learn
about special printing solutions.
Version A

Advertisement

Table of Contents

   Also See for Brother DCP-340CW

   Related Manuals for Brother DCP-340CW

   Summary of Contents for Brother DCP-340CW

  • Page 1 The Brother Solutions Center (http://solutions.brother.com) is your one stop resource for all your printing needs. Download the latest drivers and utilities for your machine, read FAQs and troubleshooting tips or learn about special printing solutions.
  • Page 2: Compilation And Publication Notice

    Improper Setup icons alert you to devices and operations that are not compatible with the printer. Trademarks Brother and the Brother logo are registered trademarks and BRAdmin Professional is a trademark of Brother Industries, Ltd. UNIX is a registered trademark of The Open Group.
  • Page 3 IMPORTANT NOTE: For technical and operational assistance, you must call the country where you purchased the machine. Calls must be made from within that country. Visit http://www.brother.com for contact information on your local Brother office. In Europe If you have any comments or suggestions, please write to us at:...
  • Page 4: Table Of Contents

    Introduction Overview... 1-1 Network function features ... 1-2 Network printing... 1-2 Network scanning ... 1-2 Network PC-FAX (not available for DCP-340CW)... 1-2 Network PhotoCapture Center Management utilities... 1-3 BRAdmin Professional (for Windows BRAdmin Light (for Mac OS Remote Setup for Windows Types of network connections ...
  • Page 5 4.WLAN Status (for wireless network only) ... 4-17 1.Status ... 4-17 2.Signal ... 4-19 3.SSID ... 4-20 4.Comm.Mode ... 4-21 ® X 10.2.4 or greater) (not available for DCP-340CW) ... 2-6 ® ... 2-6 ® ... 2-6 software to configure your machine in a wireless network... 3-11 ®...
  • Page 6 BRAdmin Professional (BRAdmin Light) ... 7-1 Network print software installation problems ... 7-2 The Brother print server is not found during setup of the network print software installation or from the printer driver of the Brother machine in Windows The Brother print server is not found using the Simple Network Configuration capabilities ®...
  • Page 7 UNIX®/Linux systems ... A-3 Using the TELNET console to configure the IP address ... A-4 Using the Brother Web BRAdmin server software for IIS* to configure the IP address ... A-5 Updating other machines through the network (Windows Installation when using a Network Print Queue or Share (printer driver only) ... A-8 Appendix B Print server specifications...
  • Page 8: Introduction

    Mac OS ✔ 9.1-9.2 To use the Brother machine through a network, you need to configure the print server, and set up the computers you use. For Wireless Users: To achieve optimum results with normal every day document printing, place the Brother machine as close to the network access point (router) as possible with minimal obstructions.
  • Page 9: Network Function Features

    PC-FAX receive (See Chapter 6 of the Software User’s Guide). Network PhotoCapture Center ® You can view, retrieve and save data from a media card inserted into the Brother machine. For Windows double click the Network PhotoCapture Center icon on the desktop of your PC. The software is ®...
  • Page 10: Management Utilities

    The Remote Setup software allows you to configure network settings from a Windows or Macintosh Types of network connections Wired network connection example Peer-to-Peer printing using TCP/IP In a Peer-to-Peer environment, each computer directly sends and receives data to and from the Brother machine. Windows Windows Windows...
  • Page 11: Network Shared Printing

    ■ The Brother machine needs to have an appropriate IP address configuration. ■ If you are using a router, the Gateway address must be configured on the computers and the Brother machine. ■ The Brother machine can also communicate with Macintosh devices.
  • Page 12: Wireless Network Connection Example

    This type of network has a central access point at the heart of the network. The access point can also act as a bridge or a gateway to a wired network. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs via an access point.
  • Page 13: Connected To Wireless Capable Computer Without An Access Point In The Network (ad-hoc Mode)

    This type of network does not have a central access point. Each wireless client communicates directly with each other. When the Brother wireless machine (your machine) is part of this network, it receives all print jobs directly from the computer sending the print data.
  • Page 14: Protocols

    IP address from the range 169.254.1.0 to 169.254.254.255. DNS client The Brother print server supports the Domain Name Service (DNS) client function. This function allows the print server to communicate with other devices by using its DNS name.
  • Page 15: Mdns

    Introduction mDNS ® mDNS allows the Brother print server to automatically configure itself to work in a Mac OS X Simple Network ® Configured system. (Mac OS X 10.2.4 or greater). TELNET The Brother print server supports TELNET server for command line configuration.
  • Page 16: Configuring Your Machine For A Network With An Ethernet Cable Connection

    You will be guided by the on-screen instructions until you are able to use your Brother machine on the network. Please follow the instructions in the supplied Quick Setup Guide.
  • Page 17: How The Ip Address Is Assigned To Your Print Server

    APIPA, see Using APIPA to configure the IP address on page A-3. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. However, you can easily change this IP address number to match with the IP address details of your network. For information on how to change the IP address, see Setting the IP address and subnet mask on page 2-3.
  • Page 18: Gateway (and Router)

    Using the BRAdmin Professional utility to configure your machine for a network ® (for Windows only) BRAdmin Professional utility The BRAdmin Professional utility is designed to allow you to manage your network connected Brother machines in a TCP/IP environment. How to configure your machine using the BRAdmin Professional utility Note •...
  • Page 19: Using The Control Panel To Configure Your Machine For A Network

    Enter the IP address, Subnet Mask and Gateway (if needed) of your print server. Click OK. With the correctly programmed IP address, you will see the Brother print server in the device list. Using the control panel to configure your machine for a network You can configure your machine for a network using the control panel LAN menu.
  • Page 20: Changing The Print Server Settings

    Windows only) Start the BRAdmin Professional utility (from Windows Programs / Brother Administrator Utilities / Brother BRAdmin Professional Utilities / BRAdmin Professional. Select TCP/IP in the left frame of the main BRAdmin window. Select the print server which you want to configure, in the right frame of the main BRAdmin window.
  • Page 21: Using The Remote Setup To Change The Print Server Settings (for Windows And Mac Osx 10.2.4 Or Greater) (not Available For Dcp-340cw)

    Macintosh and displayed on your Macintosh them directly to the machine. Double click the Macintosh HD icon on your desktop, Library, Printers, Brother, then Utilities. Double click the Remote Setup icon. Click TCP/IP (Wired) or Setup Misc. You can now change the print server settings.
  • Page 22: Configuring Your Machine For A Wireless Network

    Wireless networks use channels. Each wireless channel is on a different frequency. When configuring your Brother device to work in a wireless network, you must set it to the channel that is used on the wireless network that you are connecting to. There are up to 14 different channels that can be used when using a wireless network.
  • Page 23: Authentication And Encryption

    (Infrastructure mode) on page 1-5.) Encryption methods Encryption is used to secure the data that is sent over the wireless network. The Brother machine supports the following encryption methods: ■...
  • Page 24: Network Key

    Make sure that the Network I/F is set to WLAN. (See 6.Network I/F on page 4-26) ■ If you like to connect your machine to your computer in Ad-hoc mode, we recommend you prepare the wireless network with your computer before you start the wireless wizard. (For DCP-340CW) Press Menu. to select 3.LAN. Press ▲...
  • Page 25 After a few seconds, you can select the SSID from the list using If your SSID is displayed and you have selected it, go to Step 11. If you want to add a new SSID, go to Step 7. Select SSID&Set Brother Select <New SSID> using ▲ Select SSID&Set <New SSID>...
  • Page 26 Configuring your machine for a wireless network Select the Authentication method using If you select Open System, go to Step 11. If you select Shared Key, go to Step 12. If you select WPA-PSK, go to Step 13. Auth. Select Auth.
  • Page 27 Configuring your machine for a wireless network The following will be displayed. KEY1 selected with no change To apply the settings, use ▲ If you select Yes, go to Step 18. If you select No, go back to Step 2. Apply Settings? ▲...
  • Page 28 After a few seconds, you can select the SSID from the list using If your SSID is displayed and you have selected it, go to Step 8. If you want to add a new SSID, go to Step 4. Select SSID&Set Brother Select <New SSID> using ▲ Select SSID&Set <New SSID>...
  • Page 29 Configuring your machine for a wireless network Select the key option; KEY1, KEY2, KEY3, KEY4 using Set WEP KEY Set WEP KEY KEY1:********** KEY2: If you select the key which shows **********, go to Step 11. If you select a blank key, go to Step 12. Enter a new WPA key.
  • Page 30 Configuring your machine for a wireless network If your wireless network is connected successfully, the display shows Connected for 2 seconds and configuration is completed. Connected If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network troubleshooting on page 7-8.
  • Page 31 Configuring your machine for a wireless network Select the Encryption type, None or WEP using If you select None, go to Step 17. If you select WEP, go to Step 12. Select the key option; KEY1, KEY2, KEY3, KEY4 using If you select the key which shows **********, go to Step 14.
  • Page 32: Using The Secureeasysetup Tm Software To Configure Your Machine In A Wireless Network

    Routers or access points that support SecureEasySetup product: (For DCP-340CW) Temporarily place the machine with 50 cm/20 in. range of the access point. Push the SecureEasySetup Press Menu on the control panel of the Brother machine. to select 3.LAN. Press ▲ ▼...
  • Page 33 Temporarily place the machine within 50 cm/20 in. range of the access point. Push the SecureEasySetup Press Menu/Set, 5, 3, 2 on the control panel of the Brother machine. The wireless network connection status will be displayed and will show either; Connecting WLAN, Connected or Connection Error.
  • Page 34: Using The Brother Automatic Installer Application In The Cd-rom To Configure Your Machine For A Wireless Network

    Using the Brother automatic installer application in the CD-ROM to configure your machine for a wireless network See Chapter 8 (for Windows) and Chapter 9 (for Macintosh) for information on how to use the Brother automatic installer application in the CD-ROM we have provided with the machine.
  • Page 35 Node name: Node name appears in current BRAdmin Professional window. The default Node name is “BRW_xxxxxx” ("xxxxxx" is the last six digits of Ethernet address.). Start the BRAdmin Professional utility (from Windows Programs / Brother Administrator Utilities / Brother BRAdmin Professional Utilities / BRAdmin Professional. Note •...
  • Page 36: Using The Remote Setup To Change The Print Server Settings (for Windows And Mac Osx 10.2.4 Or Greater) (not Available For Dcp-340cw)

    Macintosh and displayed on your Macintosh directly to the machine. Double click the Macintosh HD icon on your desktop, Library, Printers, Brother, then Utilities. Double click the Remote Setup icon. Click TCP/IP (WLAN), Setup WLAN, WLAN Status or Setup Misc.
  • Page 37: Control Panel Setup

    In this chapter, you will learn how to configure the network settings using the control panel, located on the front of the machine. The LAN menu selections of the control panel allow you to set up the Brother machine for your network configuration. Press Menu/Set, then press the appropriate number, 5 for LAN for example. Proceed to the menu selection you wish to configure.
  • Page 38 Control panel setup Press Stop/Exit. (For MFC-640CW) (For Wired) Press Menu/Set, 5, 1, 1. (For Wireless) Press Menu/Set, 5, 2, 1. Press ▲ ▼ to select Auto, Static, RARP, BOOTP or DHCP. Press Menu/Set. Press Stop/Exit. (For MFC-820CW) Press Menu. to select LAN.
  • Page 39 RARP mode The Brother print server IP address can be configured using the Reverse ARP (RARP) service on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the following: (“BRN”...
  • Page 40: Ip Address

    As with rarp, the print server will load its IP address from the BOOTP server when the printer is powered on. DHCP mode Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation.
  • Page 41 Control panel setup Press ▲ ▼ to select 2.IP Address. Press Set. Press ▲ ▼ to select 1 to change. Press Set. Press ▲ repeatedly to enter the first three-digit number of the IP address. Press Set. Repeat this step until you have entered the fourth three-digit number to complete the IP address. Note Each number can also be increased / decreased by holding down Press Stop/Exit.
  • Page 42: Subnet Mask

    This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet mask to use. (For DCP-340CW) Press Menu. Press ▲...
  • Page 43: Gateway

    BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a gateway or router, leave this field blank. Check with your network administrator if you are unsure. (For DCP-340CW) Press Menu.
  • Page 44 Control panel setup (For Wired) Press ▲ ▼ to select 1.TCP/IP(Wired). (For Wireless) Press ▲ ▼ to select 2.TCP/IP(WLAN). Press Set. Press ▲ ▼ to select 4.Gateway. Press Set. Press ▲ ▼ to select 1 to change. Press Set. Press ▲...
  • Page 45: Node Name

    You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will be the name that is registered by the WINS server on your network. Brother recommends the name BRN_xxxxxx for a wired network or BRW_xxxxxx for a wireless network (where XXXXXX is the last six digits of the Ethernet address) (up to 15 characters).
  • Page 46: Wins Config

    ▼ Press OK. Enter the Node Name. Press OK. Press Stop/Exit. 6.WINS Config This selection controls how the machine obtains the IP address of the WINS server. (For DCP-340CW) Press Menu. Press to select 3.LAN. ▲ ▼ Press Set. 4 - 10...
  • Page 47 Control panel setup (For Wired) Press ▲ ▼ to select 1.TCP/IP(Wired). (For Wireless) Press ▲ ▼ to select 2.TCP/IP(WLAN). Press Set. Press ▲ ▼ to select 6.WINS Config. Press Set. Press ▲ ▼ to select Auto or Static. Press Set. Press Stop/Exit.
  • Page 48: Wins Server

    Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS servers. You must set the BOOT Method to Auto for this feature to work. Static Uses a specified IP address for the primary and secondary WINS servers. 7.WINS Server (For DCP-340CW) Press Menu. Press to select 3.LAN. ▲...
  • Page 49 Control panel setup Press Menu/Set. Enter the WINS Server address. Press Menu/Set. Press Stop/Exit. (For MFC-820CW) Press Menu. to select LAN. Press ▲ ▼ Press OK. to select TCP/IP(Wired). (For Wired) Press ▲ ▼ to select TCP/IP(WLAN) (For Wireless) Press ▲...
  • Page 50: Dns Server

    If set to a non-zero value, the machine will contact this server to register its name with the Windows Internet Name Service. If you have a primary WINS server, but no secondary WINS server, simply leave this field blank. 8.DNS Server (For DCP-340CW) Press Menu. Press ▲...
  • Page 51 Control panel setup Press Menu/Set. Enter the DNS Server address. Press Menu/Set. Press Stop/Exit. (For MFC-820CW) Press Menu. to select LAN. Press ▲ ▼ Press OK. to select TCP/IP(Wired). (For Wired) Press ▲ ▼ to select TCP/IP(WLAN) (For Wireless) Press ▲...
  • Page 52: Apipa

    (169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT Method you have set (see 1.BOOT Method on page 4-1). Selecting Off means the IP address doesn’t change, when the print server cannot obtain an IP address through the BOOT Method you have set. (For DCP-340CW) Press Menu. Press ▲...
  • Page 53: Setup Wlan (for Wireless Network Only)

    3-11. 4.WLAN Status (for wireless network only) 1.Status This field displays the current wireless network status; Active (802.11b), Active (802.11g), Searching SSID or Disabled. (For DCP-340CW) Press Menu. Press ▲ ▼...
  • Page 54 Control panel setup Press ▲ ▼ to select 4.WLAN Status. Press Set. Press ▲ ▼ to select 1.Status. Press Set. The current wireless network status will be displayed; Active (802.11b), Active (802.11g), Searching SSID or Disabled. Press Stop/Exit. (For MFC-640CW) Press Menu/Set, 5, 4, 1.
  • Page 55: Signal

    Control panel setup 2.Signal This field displays the current wireless network signal strength; Strong, Medium, Weak or None. (For DCP-340CW) Press Menu. Press ▲ ▼ to select 3.LAN. Press Set. Press ▲ ▼ to select 4.WLAN Status. Press Set. Press ▲...
  • Page 56: Ssid

    Control panel setup Press Stop/Exit. 3.SSID This field displays the current wireless network SSID. The display shows less than 33 characters of the SSID name. (For DCP-340CW) Press Menu. Press to select 3.LAN. ▲ ▼ Press Set. Press ▲ ▼...
  • Page 57: Comm.mode

    ▲ ▼ Press OK. The current wireless network SSID will be displayed. Press Stop/Exit. 4.Comm.Mode This field displays the current wireless network communication mode; Ad-hoc or Infrastructure. (For DCP-340CW) Press Menu. Press ▲ ▼ to select 3.LAN. Press Set. Press ▲...
  • Page 58: Security Mode

    The current wireless network communication mode will be displayed; Ad-hoc or Infrastructure. Press Stop/Exit. 5.Security Mode This field displays the current wireless network security settings; authentication method and encryption mode settings. (For DCP-340CW) Press Menu. Press ▲ ▼ to select 3.LAN.
  • Page 59: Setup Misc

    Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been reset (default is Auto). Note If you incorrectly set this value, you may not be able to communicate with your print server. (For DCP-340CW) Press Menu. Press ▲...
  • Page 60: Time Zone (not Available For Dcp-340cw)

    ▼ Press Stop/Exit. 2.Time Zone (not available for DCP-340CW) This field displays your country time zone. The time shown is the time difference between your country and Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is GMT-05:00.
  • Page 61 Control panel setup Press Menu/Set. Press Stop/Exit. (For MFC-820CW) Press Menu. to select LAN. Press ▲ ▼ Press OK. to select Setup Misc.. Press ▲ ▼ Press OK. to select Time Zone. Press ▲ ▼ Press OK. Press to enter the time. ▲...
  • Page 62: Network I/f

    If you want to use the wired network connection, select Wired LAN, and if you want to use the wireless network connection, select WLAN. You can only have one network connection type active at a time. (For DCP-340CW) Press Menu.
  • Page 63: Printing The Network Configuration List

    “BRW_xxxxxx” for a wireless network ("xxxxxx" is the last six digits of Ethernet address.). The Network Configuration List prints a report listing all the current network configuration including the network print server settings. (For DCP-340CW) Press Menu. Press ▲...
  • Page 64: Restoring The Network Settings To Factory Default

    IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default. (For DCP-340CW) Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable).
  • Page 65 Control panel setup (For MFC-640CW) Make sure the machine is not operating, then disconnect all the cables from the machine (except power cable). Press Menu/Set, 5, 0. Press 1 to select 1.Reset. Press 1 to select 1.Yes. The machine will re-start, re-connect cables once this is complete. (For MFC-820CW) Press Menu.
  • Page 66: Network Printing From Windows

    TCP/IP protocol in a Peer-to-Peer environment, please follow the instructions in this chapter. This chapter explains how to install the network software and the printer driver which you will need to be able to use as a network printer.
  • Page 67: Printer Driver Already Installed

    OK. Select your printer, then click Next. Specify a name and select Yes or No if you want this driver to be default printer, and then click Next. Now specify if you wish to share the printer, enter the share name and click Next.
  • Page 68: For Windows 98/98se/me Users

    Note If you already installed the driver from the supplied CD-ROM with the machine Installer and you selected Brother Peer-to-Peer Network Printer during the installation then you do not need to install the network software and the printer driver again.
  • Page 69: Associating To The Printer

    Peer-to-Peer software on page 5-3) and click Next. Enter any desired name for the Brother printer. For example, you could call the printer “Networked Brother Printer”. Select Yes or No if you want this driver to be default printer, and then click Next. ®...
  • Page 70: Adding A Second Brother Lpr Port

    Adding a second Brother LPR port You do not re-run the install program to add a new Brother LPR port. Instead, go to the Start button, select Settings, and open the Printers window. Click the icon of the printer that you wish to configure, select File from the menu bar, and then Properties.
  • Page 71: Network Printing From Macintosh

    This chapter explains how to print from Macintosh ® capabilities on Mac OS X 10.2.4 or greater. For more information on how to configure the Brother ink driver ® on a Network for Mac OS 9.1 to 9.2, see the Quick Setup Guide included with the machine.
  • Page 72: 10.2.4 Or Greater

    Select Brother MFC-XXXX or Brother DCP-XXXX (XXXX is your model name), and then click Add. Click the printer, then click Make Default to set the printer as the default printer. The printer is now ready to print. Changing the configuration using the Remote Setup ®...
  • Page 73: Other Sources Of Information

    Network printing from Macintosh® Other sources of information See Chapter 2 of this User’s Guide to learn how to configure the IP address of the printer. Visit http://solutions.brother.com for more information on network printing. 6 - 3...
  • Page 74: Troubleshooting

    Overview This chapter explains how to resolve typical network problems you may encounter when using the machine. If, after reading this chapter, you are unable to resolve your problem, please visit the Brother Solutions Center at: http://solutions.brother.com. This chapter is divided into the following sections: ■...
  • Page 75: Network Print Software Installation Problems

    Mac OS (For a network with an Ethernet cable connection) Make sure you have completed the IP address setting of the Brother print server according to Chapter 2 of this User’s Guide before installing the network print software or printer driver.
  • Page 76 (1) From the Apple menu, open the Chooser. (2) Click the Brother Ink (IP) icon, and make sure that your print server name appears in the right frame. If it is visible, then the connection is good. Otherwise, go to Step 5.
  • Page 77 If the box is selected, click the box to remove the check. Then, click (5) Once your firewall is disabled, try reinstalling the Brother software package. For instructions on how to install from the CD-ROM, use the Quick Setup Guide we have provided with the machine.
  • Page 78: Printing Problems

    Select again your machine in the DeviceSelector application located in Macintosh HD/Library/Printers/Brother/Utilities or from the ControlCenter2. Move your PC closer to the Brother machine and try again. Reset the print server back to its default factory settings and try again. For the information how to reset to the factory default settings, see Restoring the network settings to factory default on page 4-28.
  • Page 79: Error During Printing

    (1) From the Apple menu, open the Chooser. (2) Click the Brother Ink (IP) icon, and make sure that your print server name appears in the right frame. If it is visible, then the connection is good. Otherwise, go to Step 4.
  • Page 80: Scanning And Pc-fax Problems

    Windows 98/98SE/Me Peer-to-Peer print (LPR) troubleshooting If you are having trouble printing on a Windows following: Make sure that the Brother LPR Port driver is correctly installed and configured according to the ® 98/98SE/Me Peer-to-Peer chapter. See For Windows Windows Try to turn the Byte Count on in the Configure port area of printer driver properties.
  • Page 81: Wireless Network Troubleshooting

    Wireless network troubleshooting Wireless setup problems The Brother print server is not found during setup by the Wireless Device Setup Wizard. Make sure that the machine is powered on, is on-line and ready to print. Move your computer closer to the Brother machine and try again.
  • Page 82: Wireless Connection Problem

    Troubleshooting Wireless connection problem The wireless network connection is sometimes disabled. The wireless network connection status is affected by the environment where the Brother machine and other wireless devices are located. The following conditions may cause connection problems: ■ A concrete or metal framed wall is located between the Brother machine and the access point.
  • Page 83: Wireless Installation For Windows

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 84 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Note • If this window does not appear, use Windows folder of the Brother CD-ROM. • If you are using Windows greater: To access the PhotoCapture Center™ features from your computer you may have to install ®...
  • Page 85 Next. Go to step 9. If you do not have a network cable or cannot temporarily connect the Brother wireless device to your access point: Choose I’m not able to connect my device to my access point with a network cable and then click Next.
  • Page 86 It will take approximately one minute for the LAN menu on the LCD to become available after the machine restarts or is turned on. For configuration, you must temporarily connect your Brother wireless device directly to a free port on your access point, hub or router using a network cable.
  • Page 87 ® Wireless installation for Windows Note If you do not have a network cable, check I don’t have a network cable and click Next. You will need to configure the wireless settings from the control panel. Follow the onscreen instruction to complete the setup. When the setup is finished, go to step 22 for driver installation.
  • Page 88 Setup Wizard from the control panel LAN menu for a wireless network on page 3-3. When finished, go to the driver installation in Step 22. Read the Important Notice. For DCP-340CW: Press Menu, 6, and choose WLAN. Press Menu. If Reboot OK? is displayed, press ▲...
  • Page 89 ® Wireless installation for Windows You need to temporarily change your PC’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your PC. You will need them to return your PC back to its original wireless settings.
  • Page 90 ® Wireless installation for Windows If more than one wireless machine is available on the network, the following list appears. If the list is blank, check if the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next.
  • Page 91 OK and go to step 17. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 92 ® Wireless installation for Windows If you chose to use a network cable in Step 8, go to step 19. If you chose not to use a network cable in Step 8, go to step 21. Disconnect the network cable between your access point (hub or router) and the machine, and click Next.
  • Page 93 Step 6.) ® The installation of PaperPort Suite. When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait for a while.
  • Page 94 The Configure IP Address windows will appear. Enter the proper IP address information for your network by following the on-screen instructions. When the Brother and ScanSoft Registration screen is displayed, make your selection and follow the on-screen instructions. Click Finish to restart your computer. (For Windows 2000 Professional/XP, you must be logged on with Administrator rights.)
  • Page 95 After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Diagnostics shows a failure, please follow the on-screen instructions or read on-line help and FAQ’s in Start/All Programs/Brother/MFL-Pro Suite MFC-820CW (or DCP-340CW or MFC-640CW).
  • Page 96: For Windows 98/98se/me/2000 Professional/xp

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 97 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Note • If this window does not appear, use Windows folder of the Brother CD-ROM. • If you are using Windows greater: To access the PhotoCapture Center™ features from your computer you may have to install ®...
  • Page 98 Next. Go to step 9. If you do not have a network cable or cannot temporarily connect the Brother wireless device to your access point: Choose I’m not able to connect my device to my access point with a network cable and then click Next.
  • Page 99 It will take approximately one minute for the LAN menu on the LCD to become available after the machine restarts or is turned on. For configuration, you must temporarily connect your Brother wireless device directly to a free port on your access point, hub or router using a network cable.
  • Page 100 ® Wireless installation for Windows Note If you do not have a network cable, check I don’t have a network cable and click Next. You will need to configure the wireless settings from the control panel. Follow the onscreen instruction to complete the setup. When the setup is finished, go to step 19 for driver installation.
  • Page 101 ® Wireless installation for Windows If more than one wireless machine is available on the network, the following list appears. If the list is blank, check if the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next.
  • Page 102 OK and go to step 16. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 103 ® Wireless installation for Windows Disconnect the network cable between your access point (hub or router) and the machine, and click Next. The machine will restart automatically. After the machine is restarted, check Checked and confirmed., and then click Next. Wait until the restart is completed.
  • Page 104 ® Wireless installation for Windows When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait for a while.
  • Page 105 After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Diagnostics shows a failure, please follow the on-screen instructions or read on-line help and FAQ’s in Start/All Programs/Brother/MFL-Pro Suite MFC-820CW (or DCP-340CW or MFC-640CW).
  • Page 106: Installation Using With An Access Point That Supports Secureeasysetup

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 107 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Note • If this window does not appear, use Windows folder of the Brother CD-ROM. • If you are using Windows greater: To access the PhotoCapture Center™ features from your computer you may have to install ®...
  • Page 108 ® Wireless installation for Windows Choose Wireless Setup and Driver Install, and then click Next. Choose I’d like to use the SecureEasySetup function of my access point to configure my wireless device. and click Next. Ensure the on-screen message and click Next. Temporary place the machine within a 50 cm/20 inch range from the access point.
  • Page 109 Refer to the instruction manual that came with your access point to set the SecureEasySetup of your access point. Put the machine in SecureEasySetup For DCP-340CW: Press ▲ For MFC-640CW: Press Menu/Set, 5, 3, 2 on the control panel. For MFC-820CW: Press Menu, for SecureEasySetup and press OK.
  • Page 110 When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait for a while. Improper Setup •...
  • Page 111 The Configure IP Address windows will appear. Enter the proper IP address information for your network by following the on-screen instructions. When the Brother and ScanSoft Registration screen is displayed, make your selection and follow the on-screen instructions. Click Finish to restart your computer. (For Windows 2000 Professional/XP, you must be logged on with Administrator rights.)
  • Page 112 After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Diagnostics shows a failure, please follow the on-screen instructions or read on-line help and FAQ’s in Start/All Programs/Brother/MFL-Pro Suite MFC-820CW (or DCP-340CW or MFC-640CW).
  • Page 113: Installation Using A Wireless Computer In Ad-hoc Mode

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 114 The CD-ROM main menu will appear. Click Install MFL-Pro Suite. Note • If this window does not appear, use Windows folder of the Brother CD-ROM. • If you are using Windows greater: To access the PhotoCapture Center™ features from your computer you may have to install ®...
  • Page 115 ® Wireless installation for Windows Choose Wireless Setup and Driver Install, and then click Next. Choose Automatic (Recommended) and then click Next. Choose I’m not able to connect my device to my access point with a network cable. Click Next. If you are using a wireless computer, choose This PC has wireless capability, and make sure I am using an access point in infrastructure mode is...
  • Page 116 LAN menu for a wireless network on page 3-3. When finished, go to the driver installation in Step 19. Read the Important Notice. For DCP-340CW: Press Menu, 6, and choose WLAN. Press Menu. If Reboot OK? is displayed, press ▲...
  • Page 117 ® Wireless installation for Windows You need to temporarily change your PC’s wireless settings. Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of your PC. You may need them when if you want to restore the current settings in future.
  • Page 118 ® Wireless installation for Windows If more than one wireless machine is available on the network, the following list appears. If the list is blank, check if the machine is powered on, and then click Refresh. Choose the machine you wish to configure, and click Next.
  • Page 119 OK and go to step 17. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 120 ® Wireless installation for Windows Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. Note If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.
  • Page 121 Wireless installation for Windows ® The installation of PaperPort Suite. When the Brother MFL-Pro Suite Software License Agreement window appears, click Yes if you agree to the Software License Agreement. The installation of the Brother drivers will automatically start. The installation screens appear one after another. Please wait for a while.
  • Page 122 After restarting the computer, the Installation Diagnostics will run automatically. If the installation is unsuccessful, the installation results window will be shown. If the Diagnostics shows a failure, please follow the on-screen instructions or read on-line help and FAQ’s in Start/All Programs/Brother/MFL-Pro Suite MFC-820CW (or DCP-340CW or MFC-640CW).
  • Page 123: Wireless Installation For Macintosh

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 124 ® Wireless installation for Macintosh Click MFL-Pro Suite to install. Choose Wireless Network Connection, and then click Next. Choose Wireless Setup and Driver Install, and then click Next. Choose Automatic (Recommended) and then click Next. 9 - 2...
  • Page 125 Next. Go to step 10. If you do not have a network cable or cannot temporarily connect the Brother wireless device to your access point: Choose I’m not able to connect my device to my access point with a network cable and then click Next.
  • Page 126 ® Wireless installation for Macintosh When the following screen appears, open the scanner cover to its open position. Insert the network cable to your access point (hub or router) and then to the machine. You will find the LAN socket above and to the left of the ink cartridge slots, as shown.
  • Page 127 Click Next and follow the on-screen instructions to complete the setup. When finished, go to the driver installation in step Read the Important Notice. For DCP-340CW: Press Menu, 6, and choose WLAN. Press Menu. If Reboot OK? is displayed, press ▲...
  • Page 128 ® Wireless installation for Macintosh You need to temporarily change the wireless ® settings of your Macintosh . Please follow the on-screen instructions. Please make sure you take notes on all the settings such as SSID or channel of ® your Macintosh .
  • Page 129 ® Wireless installation for Macintosh If more than one wireless machine is available on the network, the following list appears. If the list is blank, check that the access point and the machine are powered on, and then click Refresh. Choose the machine you wish to configure, and click Next.
  • Page 130 OK and go to step 18. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 131 ® Wireless installation for Macintosh Disconnect the network cable between your access point (hub or router) and the machine, and click Next. The machine will restart automatically. After the machine is restarted, check Checked and confirmed., and then click Next. Wait until the restart is completed.
  • Page 132 USB interface cable to the machine before restarting your Macintosh or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem, continue but skip step 25 through 27. After the software installation is completed, you should choose your Brother machine from the Model pop-up menu in the main screen of ControlCenter2.
  • Page 133 Wireless installation for Macintosh Click Go, then Applications. Double-click the Utilities folder. ® Mac OS X 10.3 or greater users: Double-click the Printer Setup Utility icon. ® For Mac OS X 10.2.x users: Double-click the Print Center icon. Click Add.
  • Page 134 ® Wireless installation for Macintosh Make the selection shown (For Mac OS X 10.2.4 to 10.3 users). Choose Brother MFC-XXXX (where XXXX is your model name), and then click Add. ® Mac OS X 10.3 or greater users: Click Printer Setup Utility, then Quit Printer Setup Utility.
  • Page 135 ® ® When Presto! PageManager is installed, OCR capability is added to the Brother ControlCenter2. You can also easily scan, share, and organize photos and documents using Presto! Presto!® PageManager® has been installed and the installation is now complete. ®...
  • Page 136: Installation Using A Wired Computer In Infrastructure Mode For Mac Os

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 137 ® Wireless installation for Macintosh Click MFL-Pro Suite to install. Choose Wireless Network Connection, and then click Next. Choose Wireless Setup and Driver Install, and then click Next. Choose Automatic (Recommended) and then click Next. 9 - 15...
  • Page 138 Next. Go to step 10. If you do not have a network cable or cannot temporarily connect the Brother wireless device to your access point: Choose I’m not able to connect my device to my access point with a network cable and then click Next.
  • Page 139 ® Wireless installation for Macintosh When the following screen appears, open the scanner cover to its open position. Insert the network cable to your access point (hub or router) and then to the machine. You will find the LAN socket above and to the left of the ink cartridge slots, as shown.
  • Page 140 ® Wireless installation for Macintosh Follow the on-screen instructions to complete the setup by the control panel. See Using the Setup Wizard from the control panel LAN menu for a wireless network on page 3-3. When finished, go to the driver installation in step 20. If more than one wireless machine is available on the network, the following list appears.
  • Page 141 OK and go to step 17. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 142 ® Wireless installation for Macintosh Click Next. The settings will be sent to your machine. The settings will remain unchanged if you click Cancel. Note • If you want to manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.
  • Page 143 USB interface cable to the machine before restarting your Macintosh or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem, continue but skip step 22 through 24. After the software installation is completed, you should choose your Brother machine from the Model pop-up menu in the main screen of ControlCenter2.
  • Page 144 Wireless installation for Macintosh Click Go, then Applications. Double-click the Utilities folder. ® Mac OS X 10.3 or greater users: Double-click the Printer Setup Utility icon. ® For Mac OS X 10.2.x users: Double-click the Print Center icon. Click Add.
  • Page 145 ® Wireless installation for Macintosh Make the selection shown (For Mac OS X 10.2.4 to 10.3 users). Choose Brother MFC-XXXX (where XXXX is your model name), and then click Add. ® Mac OS X 10.3 or greater users: Click Printer Setup Utility, then Quit Printer Setup Utility.
  • Page 146 ® ® When Presto! PageManager is installed, OCR capability is added to the Brother ControlCenter2. You can also easily scan, share, and organize photos and documents using Presto! Presto!® PageManager® has been installed and the installation is now complete. ®...
  • Page 147: 10.2.4 Or Greater

    Important If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. For DCP-340CW: Press Menu, ▲ change. The machine will restart automatically. For MFC-640CW: Press Menu/Set, 5, 0, 1 and then press 1.Yes to accept the change. The machine will restart automatically.
  • Page 148 ® Wireless installation for Macintosh Click MFL-Pro Suite to install. Choose Wireless Network Connection, and then click Next. Choose Wireless Setup and Driver Install, and then click Next. Choose Automatic (Recommended) and then click Next. 9 - 26...
  • Page 149 ® Wireless installation for Macintosh Choose I’m not able to connect my device to my access point with a network cable. Click Next. If you are using a wireless computer, choose This PC has wireless capability., and make sure I am using an access point in infrastructure mode is not checked.
  • Page 150 ® Wireless installation for Macintosh Read the Important Notice. For DCP-340CW: Press Menu, 6, and choose WLAN. Press Menu. If Reboot OK? is displayed, press ▲ for Yes. The wired network interface will become inactive with this setting. The machine will restart automatically. After it restarts, check the box on the screen and click Next.
  • Page 151 ® Wireless installation for Macintosh Item Communication mode: (Infrastructure/Ad-hoc) Channel: (1-14) Network name (SSID/ESSID) Authentication method (Open system/Shared key) Encryption: (None/WEP/Other) Encryption key: To communicate with the un-configured wireless machine, change the wireless settings on your ® Macintosh to the machine’s default settings which are shown on the screen.
  • Page 152 OK and go to step 18. If your network is configured for Authentication and Encryption, the following screen will appear. When configuring your Brother wireless machine, you must ensure that it is configured to match the Authentication and Encryption settings of your existing wireless network.
  • Page 153 ® Wireless installation for Macintosh Note • If you want to set more than one WEP key, click Advanced. • If you do not know the Authentication or Encryption settings for network, contact your network administrator. Enter a new SSID and choose Authentication Method and Encryption Mode from the pull-downs in each setting box.
  • Page 154 USB interface cable to the machine before restarting your Macintosh or if you are overwriting a previously installed version of the Brother Software. If you encounter this problem, continue but skip step 22 through 24. After the software installation is completed, you should choose your Brother machine from the Model pop-up menu in the main screen of ControlCenter2.
  • Page 155 ® Wireless installation for Macintosh Click Browse. Choose your model name, and then click OK. Click Go, then Applications. Double-click the Utilities folder. 9 - 33...
  • Page 156 Mac OS X 10.2.4 to 10.3 users; go to step 29. Mac OS X 10.4 users; go to step 30. Make the selection shown (For Mac OS X 10.2.4 to 10.3 users). Choose Brother MFC-XXXX (where XXXX is your model name), and then click Add. 9 - 34...
  • Page 157 ® When Presto! PageManager is installed, OCR capability is added to the Brother ControlCenter2. You can also easily scan, share, and organize photos and documents using Presto! Presto!® PageManager® has been installed and the installation is now complete. network, see Network printing from ®...
  • Page 158: Other Ways To Set The Ip Address (for Advanced Users And Administrators

    Appendix A Other ways to set the IP address (for advanced users and administrators) For information on how to configure your machine for a network using the BRAdmin Professional utility or a web browser, see Setting the IP address and subnet mask on page 2-3. Using DHCP to configure the IP address The Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation.
  • Page 159: Using Rarp To Configure The Ip Address

    -ax | grep -v grep | grep rarpd ® For AT&T UNIX -based systems, type: ps -ef | grep -v grep | grep rarpd The Brother print server will get the IP address from the rarp daemon when the printer is powered on. A - 2...
  • Page 160: Using Apipa To Configure The Ip Address

    For more information, see 9.APIPA on page 4-16. If the APIPA protocol is disabled, the default IP address of a Brother print server is 192.0.0.192. However, you can easily change this IP address number to match with the IP address details of your network.
  • Page 161: Using The Telnet Console To Configure The Ip Address

    If your Administrator has configured the system to deliver IP addresses using BOOTP, DHCP or RARP your Brother print server can receive an IP address from any one of these IP address allocation systems. In which case, you will not need to use the ARP command. The ARP command only works once. For security reasons, once you have successfully configured the IP address of a Brother print server using the ARP command, you cannot use the ARP command again to change the address.
  • Page 162: Using The Brother Web Bradmin Server Software For Iis* To Configure The Ip Address

    Java. Please note this software is not included on the CD-ROM that was supplied with your Brother product. Please visit http://solutions.brother.com/webbradmin to learn more about this software and to download it.
  • Page 163: Updating Other Machines Through The Network

    Updating other machines through the network (Windows only) It is possible to program a Brother machine on the network with either settings from an already programmed machine or with data from the Brother PC-FAX Address Book. (See Chapter 5 of the Software User’s Guide)
  • Page 164 Address Book dialog box. The left side of the dialog box displays the One-Touch / Speed-Dial numbers read from the machine. The right side displays a list of Brother Address Book members. You can add One-Touch / Speed-Dial numbers from the machine to this list or send members from the Address Book list to the machine.
  • Page 165: Installation When Using A Network Print Queue Or Share (printer Driver Only

    Select Network Shared Printer, and then click Next. Select your printer’s queue, and then click OK. Note Contact your administrator if you are not sure about the location and name of the printer in the network. Click Finish. A - 8...
  • Page 166: Print Server Specifications

    TCP/IP Network type 10/100BASE-TX Ethernet network Network printing Windows Windows Macintosh TCP/IP) Network PC-FAX Windows (Not available for Mac OS DCP-340CW) Network scanning Windows Mac OS Network PhotoCapture Windows Center Mac OS Computer requirements Processor Minimum Speed (for drivers, BRAdmin...
  • Page 167: Ethernet Wireless Network

    Appendix B Management utilities BRAdmin Professional BRAdmin Light Web BRAdmin 1. BRAdmin Light and Web BRAdmin are available as a download from http://solutions.brother.com. Ethernet wireless network Model name NC-120w Operating system support Windows Mac OS Protocol support TCP/IP Network type IEEE 802.11b/g wireless...
  • Page 168 Speed Minimum RAM Recommended RAM Management utilities BRAdmin Professional Windows BRAdmin Light Web BRAdmin 1. BRAdmin Light and Web BRAdmin are available as a download from http://solutions.brother.com. ® Pentium II or equivalent for Windows 2000 Professional/XP ® 24MB for Windows 98/98SE/Me ®...
  • Page 169: Function Table And Default Factory Settings

    Appendix B Function table and default factory settings (For DCP-340CW) Level Level two Level three 3.LAN 1.TCP/IP 1.BOOT Method (Wired) 2.IP Address 3.Subnet Mask 4.Gateway 5.Node Name 6.WINS Config 7.WINS Server 8.DNS Server 9.APIPA 2.TCP/IP 1.BOOT Method (WLAN) 2.IP Address 3.Subnet Mask...
  • Page 170 Appendix B Level Level two Level three 3.LAN 3.Setup 1.Setup Wizard WLAN 2.SecurEasySetup Connecting WLAN 4.WLAN 1.Status Status 2.Signal 3.SSID 4.Comm.Mode 5.Security Mode 5.Setup 1.Wired LAN Misc. 6.Network Wired LAN WLAN 0.Factory Reset Reset Exit 1. The factory setting for IP Address may be changed by the APIPA setting. 2.
  • Page 171 Appendix B (For MFC-640CW) Level Level two Level three 5.LAN 1.TCP/IP 1.BOOT Method (Wired) 2.IP Address 3.Subnet Mask 4.Gateway 5.Node Name 6.WINS Config 7.WINS Server 8.DNS Server 9.APIPA 2.TCP/IP 1.BOOT Method (WLAN) 2.IP Address 3.Subnet Mask 4.Gateway 5.Node Name 6.WINS Config 7.WINS Server 8.DNS Server 9.APIPA...
  • Page 172 Appendix B Level Level two Level three 5.LAN 4.WLAN 1.Status Status 2.Signal 3.SSID 4.Comm.Mode 5.Security Mode 5.Setup 1.Wired LAN Misc. 2.Time Zone 6.Network Wired LAN WLAN 0.Factory 1.Reset Reset 2.Exit 1. The factory setting for IP Address may be changed by the APIPA setting. 2.
  • Page 173 Appendix B (For MFC-820CW) Level Level two Level three TCP/IP BOOT Method (Wired) IP Address Subnet Mask Gateway Node Name WINS Config WINS Server DNS Server APIPA TCP/IP BOOT Method (WLAN) IP Address Subnet Mask Gateway Node Name WINS Config WINS Server DNS Server APIPA...
  • Page 174 Appendix B Level Level two Level three WLAN Status Status Signal SSID Comm.Mode Security Mode Setup Wired LAN Misc. Time Zone Network Wired LAN WLAN Factory Reset 1. The factory setting for IP Address may be changed by the APIPA setting. 2.
  • Page 175: Entering Text (for Mfc-640cw And Mfc-820cw

    Appendix B Entering Text (for MFC-640CW and MFC-820CW) When you are setting certain menu selections, such as the Station ID, you may need to enter text into the machine. Most number keys have three or four letters printed on keys. The keys for 0, # and printed letters because they are used for special characters.
  • Page 176 Appendix B Press (space) ! " # $ % & ' ( ) Press # : ; < = > ? @ [ ] ^ _ Press 0 Ä Ë Ö Ü À Ç È É 0 ∗ + , - . / B - 11...
  • Page 177: Index

    Authentication ... 3-2 BOOTP ... 1-7, 4-3, A-1 BRAdmin Professional ...2-3, 2-5, 3-14 Brother LPR Port ... 5-5 Brother Peer to Peer Software ... 5-3 Brother Solutions Center ... 2-3, 3-13 Channel ... 3-1 Configuration List ... 4-27 Control panel ...2-4, 2-5, 3-16 DHCP ...
  • Page 178 Index TELNET ... 1-8, A-4 Text, entering special characters ...B-10 TKIP (Temporary Key Integrity Protocol) 3-2 Trademarks ... -i Web BRAdmin ...A-5 WEP (Wired Equivalent Privacy) ... 3-2 Windows 2000 ... 5-1 Windows 2000/XP Printing ... 5-1 Windows 98/98SE/Me ... 7-7 Windows 98/98SE/Me Printing ...

This manual is also suitable for:

Mfc-640cwMfc-820cw

Comments to this Manuals

Symbols: 0
Latest comments: