Brother DCP-340CW Network User's Manual page 90

Wireless installation for Windows
13
If more than one wireless machine is available on
the network, the following list appears. If the list is
blank, check if the access point and the machine are
powered on, and then click Refresh. Choose the
machine you wish to configure, and click Next.
Note
The Default Node name of the NC-xxxx (where "xxxx" is your model name) is "BRW_xxxxxx" or
"BRN_xxxxxx" (where "xxxxxx" is the last six digits of Ethernet address).
14
The wizard will search for wireless networks
available from your machine. If more than one
wireless network is available, the following list
appears. Choose the access point you wish to
associate the machine with, and then click Next.
Note
• If your target access point does not appear on the
list, you can manually add it by clicking the Add
button. Follow the on-screen instructions for
entering the Name (SSID) and the Channel
number.
• "SETUP" is the default SSID of the machine. Do
not choose this SSID.
• If the list is blank, check that the access point has
power, and then see if the machine and the
access point are within range for wireless
communication. Then, click Refresh.
®
8
8 - 8