Signal - Brother DCP-340CW Network User's Manual
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Control panel setup
2.Signal
This field displays the current wireless network signal strength; Strong, Medium, Weak or None.
(For DCP-340CW)
1
Press Menu.
2
Press
▲
or
▼
to select 3.LAN.
Press Set.
3
Press
▲
or
▼
to select 4.WLAN Status.
Press Set.
4
Press
▲
or
▼
to select 2.Signal.
Press Set.
5
The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
6
Press Stop/Exit.
(For MFC-640CW)
1
Press Menu/Set, 5, 4, 2.
2
The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
3
Press Stop/Exit.
(For MFC-820CW)
1
Press Menu.
2
to select LAN.
Press
▲
or
▼
Press OK.
3
to select WLAN Status.
Press
or
▲
▼
Press OK.
4
to select Signal.
Press
▲
or
▼
Press OK.
5
The current wireless network signal strength will be displayed; Strong, Medium, Weak or None.
4
4 - 19
Advertisement
Table of Contents
Troubleshooting
