Brother DCP-340CW Network User's Manual page 44
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Control panel setup
3
(For Wired) Press
▲
(For Wireless) Press
Press Set.
4
Press
▲
or
▼
to select 4.Gateway.
Press Set.
5
Press
▲
or
▼
to select 1 to change.
Press Set.
6
Press
▲
repeatedly to enter the first three-digit number for the Gateway address.
Press Set.
Repeat this step until you have entered the fourth three-digit number to complete the Gateway address.
Note
Each number can also be increased / decreased by holding down
7
Press Stop/Exit.
(For MFC-640CW)
1
(For Wired) Press Menu/Set, 5, 1, 4.
(For Wireless) Press Menu/Set, 5, 2, 4.
2
Select 1 to change. Enter the Gateway address.
3
Press Menu/Set.
4
Press Stop/Exit.
(For MFC-820CW)
1
Press Menu.
2
to select LAN.
Press
▲
or
▼
Press OK.
3
(For Wired) Press
▲
(For Wireless) Press
Press OK.
4
to select Gateway.
Press
or
▲
▼
Press OK.
or
▼
to select 1.TCP/IP(Wired).
▲
or
▼
to select 2.TCP/IP(WLAN).
to select TCP/IP(Wired).
or
▼
to select TCP/IP(WLAN)
or
▲
▼
▲
or
▼
.
4
4 - 8
Advertisement
Table of Contents
Troubleshooting
