Apipa - Brother DCP-340CW Network User's Manual

Control panel setup

9.APIPA

The setting of On will cause the print server to automatically allocate a Link-Local IP address in the range
(169.254.1.0 - 169.254.254.255) when the print server cannot obtain an IP address through the BOOT
Method you have set (see 1.BOOT Method on page 4-1). Selecting Off means the IP address doesn't change,
when the print server cannot obtain an IP address through the BOOT Method you have set.
(For DCP-340CW)
1
Press Menu.
2
Press ▲ or ▼ to select 3.LAN.
Press Set.
3
(For Wired) Press ▲
(For Wireless) Press
Press Set.
4
Press or to select 9.APIPA.
▲ ▼
Press Set.
5
Press ▲ or ▼ to select On or Off.
Press Set.
6
Press Stop/Exit.
(For MFC-640CW)
1
(For Wired) Press Menu/Set, 5, 1, 9.
(For Wireless) Press Menu/Set, 5, 2, 9.
2
Press ▲ or ▼ to select On or Off.
3
Press Menu/Set.
4
Press Stop/Exit.
(For MFC-820CW)
1
Press Menu.
2
to select LAN.
Press or
▲ ▼
Press OK.
or ▼ to select 1.TCP/IP(Wired).
▲ or ▼ to select 2.TCP/IP(WLAN).
4
4 - 16