Brother DCP-340CW Network User's Manual page 28

Configuring your machine for a wireless network
3
After a few seconds, you can select the SSID from the list using
If your SSID is displayed and you have selected it, go to Step 8.
If you want to add a new SSID, go to Step 4.
Select SSID&Set
Brother
4
Select <New SSID> using
Select SSID&Set
<New SSID>
Press Set.
5
Enter the SSID. (For further information on entering text, see Entering Text (for MFC-640CW and
MFC-820CW) on page B-10.)
SSID:
_
Press Set.
6
, select Infrastructure when instructed.
Using ▲ or ▼
Mode Select
Ad-hoc
Press Set.
If you select Ad-hoc, go to Step 8.
7
Select the Authentication method using
If you select Open System, go to Step 8.
If you select Shared Key, go to Step 9.
If you select WPA-PSK, go to Step 10.
Auth. Select
Open System
8
Select the Encryption type, None or WEP using
If you select None, go to Step 14.
If you select WEP, go to Step 9.
Encryption Type?
None
or .
▲ ▼
Mode Select
Infrastructure
▲ or ▼ , and press Set.
Auth. Select
Shared Key
▲ or
Encryption Type?
WEP
▲ or ▼ . Press Set to select the SSID.
Auth. Select
WPA-PSK
▼ , and press Set.
3
3 - 7