Brother DCP-340CW Network User's Manual page 149
Multi-protocol on-board ethernet multi-function print server and wireless (ieee 802.11b/g) ethernet multi-function print server
Hide thumbs
Also See for DCP-340CW:
- Quick setup manual (43 pages) ,
- Service manual (407 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
Wireless installation for Macintosh
9
Choose I'm not able to connect my device to my
access point with a network cable. Click Next.
10
If you are using a wireless computer, choose This
PC has wireless capability., and make sure I am
using an access point in infrastructure mode is
not checked. Click Next.
If you are using a wired computer, choose This PC
uses a network cable to connect to the wireless
network., and you must configure the wireless
settings from the control panel. Click Next and follow
the on-screen instructions to complete the setup.
See Using the Setup Wizard from the control panel
LAN menu for a wireless network on page 3-3. When
finished, go to the driver installation in step 20.
®
9
9 - 27
Advertisement
Table of Contents
Troubleshooting
