Wireless installation for Macintosh
11
Read the Important Notice.
For DCP-340CW: Press Menu,
6, and choose WLAN. Press Menu. If Reboot OK? is
displayed, press
▲
interface will become inactive with this setting. The
machine will restart automatically. After it restarts,
check the box on the screen and click Next.
For MFC-640CW: Press Menu/Set, 5, 6, and then
press
▲
or
▼
to choose WLAN. Press Menu/Set. If
Reboot OK? is displayed, press 1.Yes. The wired
network interface will become inactive with this
setting. The machine will restart automatically. After
it restarts, check the box on the screen and click
Next.
For MFC-820CW: Press Menu on the control panel. Press
for Network I/F and press OK. Press
press 1 for Yes. The wired network interface will become inactive with this setting. The machine will
restart automatically. After it restarts, check the box on the screen and click Next.
If Accepted is displayed, press Stop/Exit. Check the box on the screen and click Next.
Note
It will take approximately one minute for the LAN menu on the LCD to become available after the machine
restarts or is turned on.
You need to temporarily change the wireless
settings of your Macintosh
on-screen instructions. Please make sure you take
notes on all the settings such as SSID or channel of
®
your Macintosh
. You may need them when if you
want to restore the current settings in future.
®
▲
or
▼
to choose 3,
for Yes. The wired network
▲
®
. Please follow the
for LAN and press OK. Press
▲
or
▼
for WLAN and press OK. If Reboot OK? is displayed,
or
▼
9
▲
or
▼
9 - 28