Section 1: Introduction; Introduction - BIFFI ICON3000 Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
MDE 256 Rev. 1

Section 1: Introduction

The PRO2000v4_RED is a double electronic card that allows connecting the Biffi electrical actuator
ICON3000 actuators to a PROFIBUS DP network. The cards have their microprocessors and a program
stored internally control them, it works as a pure bus interface and does not affect the actuator
control integrity. It is installed inside the actuator housing and takes the electrical power from the
actuator power supply card. The RS485 interface is located on the card board. The PROFIBUS network
is fully isolated from the actuator electronics.
The PRO2000v4_RED is designed to support PROFIBUS redundant communication as per Slave
Redundancy Specification PNO Order No: 2.212.

Introduction

Section 1: Introduction
April 2021
1