Appendix H. Rfc1483 Quick Start (Bridging) - ADTRAN TA 544 User Manual

The TA 544 allows for complete integration of voice and data delivery from one compact platform. Once you have
completed the voice turn up procedure from the previous example, adding data to the circuit requires some additional
setup.
To configure a TA 544 for Bridging, you need to know the VPI and VCI values for the data circuit on your network.
Bridging
Step
1
2
3
4
5
6
7
8
9
10
11
12
© 2001, ADTRAN, Inc.

Appendix H. RFC1483 Quick Start (Bridging)

From the TA 544 main menu, select the W
the ATM network.)
Select the ATM C
ONFIG
Enter the I C format for your network.
DLE ELLS
Set D S appropriately for your network.
ATA CRAMBLING
Back all the way out to the top level TA 544 menu, and then select the
R menu.
OUTER
Enter the C
ONFIGURATION
From this menu, you will set up addresses for your LAN and WAN.
For basic IP routing, use all the default values from the G
From the E menu, enter the IP menu to enter your LAN
THERNET
configuration.
Enter your LAN IP
ADDRESS
For this example, the IP
is 255.255.255.0. This is not required, but will allow Telnet configuration
and TFTP upgrades from the LAN.
Arrow back to the main R
WAN menu and then the ATM menu. (Here you will enter your data
PVC information.)
Create a new PVC by entering the menu. Enter your VPI and VCI
values.
Disable IP on the RFC1483 IP menu and enable Bridging on the
RFC1483 B menu. (This enables the TA 544 as a bridge.)
RIDGE
Arrow back to the top level TA 544 menu to activate your changes.
All packets that come in on the Ethernet will be forwarded on the WAN.
TA 544 User Manual/61200704L1-1A
Action
menu. (Here you set up
AN
menu.
menu.
and S M .
UBNET ASK
is 192.168.1.2 and the S
ADDRESS
C menu, and select the
OUTER ONFIGURATION
Page 67 of 68
menu.
LOBAL
M
UBNET ASK
TA 544 User Manual