ADTRAN TA 544 User Manual page 55

Perform Steps Below in the Order Listed
1. Using a Telnet program,
2. Select S
YSTEM
3. Select TFTP for T
4. Enter into TFTP S
earlier.
5. Enter into TFTP S
recorded earlier.
6. Select S T
TART
to set up the module to receive the TFTP upload.
During the TFTP upload process, various status messages display in C
to indicate progress. The table below describes these messages.
When the update has successfully completed, T
restarts immediately and resumes operation.
If an error occurs during the update, an error message will display in the T
return to Step 3 and attempt the update again. If the same error occurs, contact ADTRAN Technical Support.
During the TFTP upload, various status messages display to indicate progress. The following table describes these
messages.
Message
Contacting Server
Beginning TFTP
Transfer
Completed
© 2001, ADTRAN, Inc.
to TA 544.
log in
U / U F
TILITY PDATE IRMWARE
M .
RANSFER ETHOD
IP A the IP address of the network server that was recorded
ERVER DDRESS
F the full path name and filename of the update file that was
ERVER ILENAME
<+> to start the update process. Enter
RANSFER
RANSFER
Indicates communication with the TFTP network server
is trying to be established with the specified server
address in the TFTP S
Indicates communication with the TFTP network server
has been established and the update file is being trans-
ferred between TA 544 and the TFTP network server.
Indicates the TA 544 product successfully received the
update file.
TA 544 User Manual/61200704L1-1A
.
Y
C displays in T
OMPLETE
RANSFER
Meaning
IP A
ERVER DDRESS
Page 55 of 68
to confirm the transfer and
U S
URRENT PDATE
S
. The TA 544
RANSFER TATUS
S field. If this occurs,
TATUS
field.
TA 544 User Manual
TATUS