ADTRAN TA 544 User Manual page 63

Voice Turn Up
Step
1
2
3
4
5
6
7
© 2001, ADTRAN, Inc.
From the TA 544 main menu, select the W
the ATM network.)
Select the ATM C menu.
ONFIG
Enter the I C format for your network.
DLE ELLS
Set D S appropriately for your network.
ATA CRAMBLING
Back all the way out to the top level TA 544 menu, and then select the
V menu. (From this menu, the appropriate Voice information for
OICE
working with the Voice Gateway is entered.)
Select C , and from the C
ONFIG
under C C and enter the VPI and VCI values for
ALL ONTROL
communicating with that Gateway.
C C should be set to the Gateway type and the VPI and VCI
ALL ONTROL
values should be set appropriately for your network.
To verify correct setup, use the S
to look at the current status of the voice connection.
Under S , you can view the G
TATUS
about the voice PVC along with information about the ISDN ports
available on the Gateway.
The G S menu should show the Gateway Link is up (if
ATEWAY TATS
everything is configured correctly).
A visual inspection of the VOICE LED on the front panel will also yield
the status. Green = up. Red = Down.
TA 544 User Manual/61200704L1-1A
Action
menu. (Here you set up
AN
menu, enter the Gateway type
ONFIG
menu (under the V
TATUS
S and information
ATEWAY TATS
Page 63 of 68
menu)
OICE
TA 544 User Manual