Config Transfer - ADTRAN TA 544 User Manual

Start Transfer
This activator is used when the configurable items in this menu are complete.
Before using S
default gateway (if required).
Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
TFTP Server
Setting this to Y
ES
TA 544 TFTP server function and allows its code to be "cloned." Setting to N
from TFTP clients.
> Config Transfer
Sends a file containing the TA 544 configuration to a PC connected to the CRAFT port using XMODEM protocol or
to a file on a TFTP server using the TFTP protocol. See Appendix B. Updating TA 544 Firmware using XMODEM
on page 51 and Appendix C. Updating TA 544 Firmware using TFTP on page 54 for details.
C T
also lets you save the TA 544 configuration as a backup file, so you can use the same configuration
ONFIG RANSFER
with multiple TA 544 units. In addition, C
To support these transfers, ADTRAN delivers a TFTP program with the TA 544 called TFTP Server. You can con-
figure any PC running Microsoft Windows with this software, and store a configuration file.
Before using C
default gateway (if required).
Only one configuration transfer session (upload or download) can be active at a time.
Transfer Method
Displays the method used to transfer the configuration file to or from a server. XMODEM and TFTP are
supported.
Transfer Type
Only B transfers are currently supported.
INARY
TFTP Server IP Address
Specifies the IP address of the TFTP server. Get this number from your system administrator.
© 2001, ADTRAN, Inc.
T
, the TA 544 should have a valid IP address, subnet mask, and
TART RANSFER
allows another TA 544 to upgrade its code using TFTP client. This, in effect, turns on the
T
ONFIG RANSFER
T
, the TA 544 should have a valid IP address, subnet mask, and
ONFIG RANSFER
TA 544 User Manual/61200704L1-1A
can retrieve a configuration file from a TFTP server.
Page 23 of 68
(def) will deny any request
O
TA 544 User Manual