Configuring Voice Support - Config; Call Control; Vpi; Vci - ADTRAN TA 544 User Manual

TA 544 User Manual/61200704L1-1A
Page 43 of 68
Configuring Voice Support – Config
Use the V /C
menu to view and set the parameters shown in Figure 15.
OICE ONFIG

Figure 15. Voice/Config Menu

> Call Control
The C C
setting is used to configure the correct Voice Gateway protocol for voice signaling control be-
ALL ONTROL
tween the TA 544 and the configured Gateway. The C C
setting must be configured correctly before the
ALL ONTROL
voice circuits will work correctly. The TA 544 supports Jetstream, Tollbridge, and CopperCom Voice Gateways.
> VPI
The VPI setting is used to configure the TA 544 virtual path setting used to communicate with the configured Voice
Gateway.
> VCI
The VCI setting is used to configure the TA 544 virtual circuit setting used to communicate with the configured Voice
Gateway.
© 2001, ADTRAN, Inc. TA 544 User Manual