Appendix G. Rfc1483 Quick Start (Ip Routing With Nat) - ADTRAN TA 544 User Manual

TA 544 User Manual/61200704L1-1A
Page 66 of 68

Appendix G. RFC1483 Quick Start (IP Routing with NAT)

To illustrate the use of NAT, consider the example from Appendix E. To set up a single public address that will be
used to access the public network, you will use the
IP Routing with NAT
Step
1
2
3
4
5
6
TA 544 User Manual
NAT
From the NAT menu, set N
E . (This will enable translation and allow you to enter the NAT
NABLED
options.)
Set P IP A M
UBLIC DDRESS
address. During transmission, private addresses are translated into this
public (NAPT) address.
You will also need to set up the T
the body of the packets for certain protocols, such as FTP, to work
correctly.
From the T T
RANSLATION ABLE
into the table.
For P A M
UBLIC DDRESS ODE
previously specified public address.
For P , select TCP.
ROTOCOL
Make sure that T
RANSLATE
menu on the
WAN/ATM/RFC1483 IP
Action
A P
ETWORK DDRESS ORT
to S so you can enter your public
ODE PECIFIED
T
RANSLATION ABLE
menu, create a new entry by arrowing
, select NAPT A
DDRESS
B is set to Y .
ODY ES
menu.
T to
RANSLATION
to do translation on
to use the
© 2001, ADTRAN, Inc.