Pairing Your Microphone - Lightspeed Redcat User Manual

Pairing your Microphone

Your system is shipped with microphones and base units pre-paired for quick and easy use.
If, for any reason, you need to pair new components, follow this pairing process:
1. From a powered off state,
point the IR transmitter lens
toward the base unit (for
Sharemike, the transmitter lens
is located on the back of the
microphone).
FLEXMIKE
19
2. Press and hold the power
button for 5 seconds until the mic
1 and mic 2 lights start flashing,
then release the button and let the
pairing process finish.
POWER
IR TRANSMITTER
MIC 1
MIC 2
3. The "status" light on the base
unit will light up indicating the
pairing process is complete.
The mic 1 or mic 2 light on the
microphone will stay illuminated.
REDCAT
IR TRANSMITTER
MIC 1
POWER
BACK
SHAREMIKE
MIC 2
FRONT