Lightspeed Redcat User Manual page 13

D. ADDING OPTIONAL SECURITY BRACKET
TO POWER SUPPLY BRACKET
• Complete "Install wall bracket" steps on previous page.
• Before sliding Redcat onto the bracket, slide the security bracket halfway onto
the wall mounting slots.
• Continue with "Attach Redcat and power supply" steps.
• After Redcat is in place, hold the top of Redcat and push the security bracket
into the slot until you hear it 'click' in place.
NOTE: If Redcat needs to be removed, use a small flat blade screwdriver to
pry the security bracket toward the wall and out of the slot on the back of
Redcat. Lift Redcat off the power supply bracket.
13