Fax Redial; Chain Dialling - Brother MFC-9870 Owner's Manual

64
C H A P T E R S E V E N

Fax Redial

If you're sending a fax manually and the line is busy, you can retry the
number by pressing Redial/Pause.
1
Press Redial/Pause.
2
Press Start.
If you're sending a fax automatically (Using the ADF) and the line is
busy, the machine will redial automatically up to 4 (3 times for Ireland)
times at 2 minute intervals.

Chain Dialling

You can store very long dialling sequences by dividing them and setting
them up as One Touch and Speed Dial numbers. Then while dialling, you
can combine two or more One Touch and/or Speed Dial numbers and
even include manual dialling using the dial pad. You can use these
numbers in any combination. The combined number will be dialled, in
the order you entered it, as soon as you press Start.
For example:
You store "555" on One Touch Dial key 01 and "7000" on One Touch
Dial key 02. If you press One Touch 01, 02 and Start, you can dial
"555 7000". To temporarily change a number, you can substitute part of
the number with manual dialling using the dial pad. So, if you press One
Touch 01 and press 7001 using the dial pad, you can dial "555 7001".
Using access codes is easy. Sometimes you may want to choose from the
among several long distance carriers when you make a call; rates may
vary depending upon the time and destination. To take advantage of low
rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers.